Nissan Titan dashboard symbols and warning lights
Every light in the Nissan Titan owner's manual, 2010 to 2024. Tap a light to see what it means and what to do. Red means stop safely, amber means get it checked soon.
2020 to 2024 Titan warning lights
Security indicator light
Check soon · usual colour
The manual says: This light blinks whenever the ignition switch is placed in the LOCK, OFF or ACC position. This function indicates the security system equipped on the vehicle is operational. For additional information, see “Security.
What to do: Hold the key fob against the start button and start again. If it keeps happening, replace the key fob battery.
More about the key / immobilizer light · Shop key fob batterys on Amazon
Supplemental air bag warning light
Check soon
The manual says: When the ignition switch is placed in the ON position, the supplemental air bag warning light illuminates for about 7 seconds and then turns off. This means the system is operational.
What to do: It is recommended that you visit a NISSAN dealer for these services. It is recommended that you visit a NISSAN dealer for this service.
Anti-lock Braking System (ABS) warning light
Check soon · usual colour
The manual says: When the ignition switch is placed in the ON position, the ABS warning light illuminates and then turns off. This indicates the ABS is operational. If the ABS warning light illuminates while the engine is running or while driving, it may indicate the ABS is not functioning properly. If an ABS malfunction occurs, the anti-lock function is turned off.
What to do: Have the system checked. It is recommended that you visit a NISSAN dealer for this service.
Automatic Emergency Braking (AEB) with Pedestrian Detection system warning light
Check soon · usual colour
The manual says: This light comes on when the ignition switch is placed in the ON position. It turns off after the engine is started. This light illuminates when the AEB with Pedestrian Detection system is set to OFF in the vehicle information display.
What to do: Clean the windshield and front grille sensor. If it stays on in clear weather, have it checked.
Automatic Transmission check warning light
Check soon · usual colour
The manual says: When the ignition switch is placed in the ON position, the light comes on for about 2 seconds. If the light comes on at any other time, it may indicate the automatic transmission system is not functioning properly.
What to do: Have the system checked. It is recommended that you visit a NISSAN dealer for this service.
Electronic locking rear differential (E-Lock) system ON indicator light
Check soon · usual colour
The manual says: This light comes on when the electronic locking rear differential (E-Lock) system clutch is fully engaged. The indicator light flashes when the system is first turned on.When the system fully engages, the light remains on. If the switch is on and the indicator light continues to flash, the system is not engaged.
Front passenger air bag status light
Check soon · usual colour
The manual says: The front passenger air bag status light will be lit and the passenger front air bag will be off depending on how the front passenger seat is being used. For additional information, see “Front passenger air bag and status light”.
What to do: The car drives normally, but get it checked soon. Do not try to repair airbag parts yourself.
Hill descent control system ON indicator light
Information · usual colour
The manual says: When the ignition switch is placed in the ON position, this light comes on briefly and then turns off. The light comes on when the hill descent control system is activated. If the hill descent control switch is on and the indicator light blinks, the system may be disabled. You may feel or hear the system working; this is normal.
What to do: Have the system checked. It is recommended that you visit a NISSAN dealer for this service.
Malfunction Indicator Light (MIL)
Check soon · usual colour
The manual says: If this indicator light comes on steady or blinks while the engine is running, it may indicate a potential emission control malfunction. If this indicator light comes on steady for 20 seconds and then blinks for 10 seconds when the engine is not running, it indicates that the vehicle is not ready for an emission control system inspection/maintenance test.
What to do: Check the fuel-filler cap if the Loose Fuel Cap warning appears in the vehicle information display. It is recommended that you visit a NISSAN dealer for this service. Have the vehicle inspected. It is recommended that you visit a NISSAN dealer for this service.
More about the check engine light · Shop OBD2 scanners on Amazon
Master warning light
Check soon · usual colour
The manual says: This light comes on when various vehicle information display warnings appear.; No key warning; Low fuel warning; Low windshield-washer fluid warning; Loose fuel cap warning; Low tire pressure warning; 4WD error (if so equipped); Front & rear tire size differences (if so.
What to do: Read the message on the multi-information display. Red means stop safely; amber means get it checked.
Equipped) Rear Automatic Braking (RAB) system warning light
Check soon · usual colour
The manual says: This light comes on when the ignition switch is placed in the ON position. It turns off after the engine is started. This light illuminates when the RAB system is turned off in the vehicle information display. If the light illuminates when the RAB system is on, it may indicate that the system is unavailable. For additional information, see “Rear Automatic Braking (RAB)”.
What to do: Clean the windshield and front grille sensor. If it stays on in clear weather, have it checked.
Slip indicator light
Check soon · usual colour
The manual says: This indicator light will blink when the Vehicle Dynamic Control (VDC) system is operating, thus alerting the driver to the fact that the road surface is slippery and the vehicle is nearing its traction limits. You may feel or hear the system working; this is normal. The light will blink for a few seconds after the VDC system stops limiting wheel spin.
What to do: If it flashes, ease off and drive gently for the conditions. If it stays on, have the system checked.
Vehicle Dynamic Control (VDC) OFF indicator light
Check soon · usual colour
The manual says: This indicator light comes on when the VDC OFF switch is pushed to off. This indicates the VDC system is not operating. Push theVDC OFF switch again or restart the engine and the system will operate normally. For additional information, see “Vehicle Dynamic Control (VDC) system” The VDC OFF indicator light also comes on when you place the ignition switch in the ON position.
What to do: It is recommended that you visit a NISSAN dealer for this service.
Front fog light indicator light (green)
Information
The manual says: The front fog light indicator light illuminates when the front fog lights are on. For additional information, see “Fog light switch”.
What to do: Turn them off when visibility is good, as they can dazzle other drivers.
High Beam Assist indicator light (green)
Information
The manual says: This indicator light illuminates when the headlights come on while the headlight switch is in the AUTO position with the high beams selected. This indicates that the high beam assist is operational. For additional information, see “Headlight.
What to do: Dip them for oncoming traffic and when following another car.
High beam indicator light (blue)
Information
The manual says: This blue light comes on when the headlight high beams are on and goes out when the low beams are selected. The high beam indicator light also comes on when the passing signal is activated.
What to do: Dip them for oncoming traffic and when following another car.
Side light and headlight indicator light (green)
Information
The manual says: The side light and headlight indicator light illuminates when the side light or headlight position is selected. For additional information, see “Headlight switch”.
What to do: Nothing to do.
TOW mode ON indicator light (green)
Information
The manual says: This light comes on when the tow mode function is on. Both lights flash when the hazard switch is turned on.
What to do: Turn signal/hazard indicator lights (green) The appropriate light flashes when the turn signal switch is activated.
Brightness indicator
Check soon · usual colour
The manual says: This indicator appears when the vehicle information display screen brightness is being adjusted. Door Open This warning appears when a door has been opened. Flat Tire This warning appears when the low tire pressure warning light in the meter illuminates and one or more flat tires are detected while driving.
Cruise control indicator
Information · usual colour
The manual says: This indicator shows the cruise control system status. For additional information, see “Cruise control” Currently unavailable This message may appear when the Intelligent Cruise Control (ICC) system is engaged. Under the following conditions, the ICC system is automatically cancelled: When the VDC operates.; When a wheel slips.; When the VDC system is turned off.
What to do: Nothing to do.
Lane Departure Warning (LDW) indicator
Check soon · usual colour
The manual says: This indicator appears when the LDW system is engaged. For additional information, see “Lane Departure Warning (LDW)” Malfunction This warning appears when one or more of the following systems (if so equipped) is not functioning properly: Blind Spot Warning (BSW); Intelligent Cruise Control (ICC); Lane Departure Warning (LDW).
What to do: It is recommended that you visit a NISSAN dealer for this service.
Rear Automatic Braking (RAB) system indicator
Check soon · usual colour
The manual says: This indicator appears to indicate the status of the Rear Automatic Braking (RAB) system. For additional information, see “Rear Automatic Braking (RAB)”.
What to do: Clean the windshield and front grille sensor. If it stays on in clear weather, have it checked.
Speed Limit Sign indicator
Check soon · usual colour
The manual says: This message may appear when the Traffic Sign Recognition system is engaged. For additional information, see “Traffic Sign Recognition (TSR)” System fault See Owner’s Manual This warning appears if there is a malfunction in one of the following systems: Automatic Emergency Braking (AEB) with Pedestrian Detection; Intelligent Forward Collision Warning (I-FCW).
Vehicle ahead detection indicator
Check soon · usual colour
The manual says: This indicator appears when the Automatic Emergency Braking (AEB) with Pedestrian Detection system is engaged and has detected a vehicle. For additional information, see “Automatic Emergency Braking (AEB) with Pedestrian Detection”.
| Light | Colour | Meaning | |
|---|---|---|---|
| Security indicator light | Amber* | This light blinks whenever the ignition switch is placed in the LOCK, OFF or ACC position. This function indicates the security system equipped on the vehicle is operational. For additional information, see “Security. | |
| Supplemental air bag warning light | Amber | When the ignition switch is placed in the ON position, the supplemental air bag warning light illuminates for about 7 seconds and then turns off. This means the system is operational. | |
| Anti-lock Braking System (ABS) warning light | Amber* | When the ignition switch is placed in the ON position, the ABS warning light illuminates and then turns off. This indicates the ABS is operational. If the ABS warning light illuminates while the engine is running or while driving, it may indicate the ABS is not functioning properly. If an ABS malfunction occurs, the anti-lock function is turned off. | |
| Automatic Emergency Braking (AEB) with Pedestrian Detection system warning light | Amber* | This light comes on when the ignition switch is placed in the ON position. It turns off after the engine is started. This light illuminates when the AEB with Pedestrian Detection system is set to OFF in the vehicle information display. | |
| Automatic Transmission check warning light | Amber* | When the ignition switch is placed in the ON position, the light comes on for about 2 seconds. If the light comes on at any other time, it may indicate the automatic transmission system is not functioning properly. | |
| Electronic locking rear differential (E-Lock) system ON indicator light | Amber* | This light comes on when the electronic locking rear differential (E-Lock) system clutch is fully engaged. The indicator light flashes when the system is first turned on.When the system fully engages, the light remains on. If the switch is on and the indicator light continues to flash, the system is not engaged. | |
| Front passenger air bag status light | Amber* | The front passenger air bag status light will be lit and the passenger front air bag will be off depending on how the front passenger seat is being used. For additional information, see “Front passenger air bag and status light”. | |
| Malfunction Indicator Light (MIL) | Amber* | If this indicator light comes on steady or blinks while the engine is running, it may indicate a potential emission control malfunction. If this indicator light comes on steady for 20 seconds and then blinks for 10 seconds when the engine is not running, it indicates that the vehicle is not ready for an emission control system inspection/maintenance test. | |
| Master warning light | Amber* | This light comes on when various vehicle information display warnings appear.; No key warning; Low fuel warning; Low windshield-washer fluid warning; Loose fuel cap warning; Low tire pressure warning; 4WD error (if so equipped); Front & rear tire size differences (if so. | |
| Equipped) Rear Automatic Braking (RAB) system warning light | Amber* | This light comes on when the ignition switch is placed in the ON position. It turns off after the engine is started. This light illuminates when the RAB system is turned off in the vehicle information display. If the light illuminates when the RAB system is on, it may indicate that the system is unavailable. For additional information, see “Rear Automatic Braking (RAB)”. | |
| Slip indicator light | Amber* | This indicator light will blink when the Vehicle Dynamic Control (VDC) system is operating, thus alerting the driver to the fact that the road surface is slippery and the vehicle is nearing its traction limits. You may feel or hear the system working; this is normal. The light will blink for a few seconds after the VDC system stops limiting wheel spin. | |
| Vehicle Dynamic Control (VDC) OFF indicator light | Amber* | This indicator light comes on when the VDC OFF switch is pushed to off. This indicates the VDC system is not operating. Push theVDC OFF switch again or restart the engine and the system will operate normally. For additional information, see “Vehicle Dynamic Control (VDC) system” The VDC OFF indicator light also comes on when you place the ignition switch in the ON position. | |
| Brightness indicator | Amber* | This indicator appears when the vehicle information display screen brightness is being adjusted. Door Open This warning appears when a door has been opened. Flat Tire This warning appears when the low tire pressure warning light in the meter illuminates and one or more flat tires are detected while driving. | |
| Lane Departure Warning (LDW) indicator | Amber* | This indicator appears when the LDW system is engaged. For additional information, see “Lane Departure Warning (LDW)” Malfunction This warning appears when one or more of the following systems (if so equipped) is not functioning properly: Blind Spot Warning (BSW); Intelligent Cruise Control (ICC); Lane Departure Warning (LDW). | |
| Rear Automatic Braking (RAB) system indicator | Amber* | This indicator appears to indicate the status of the Rear Automatic Braking (RAB) system. For additional information, see “Rear Automatic Braking (RAB)”. | |
| Speed Limit Sign indicator | Amber* | This message may appear when the Traffic Sign Recognition system is engaged. For additional information, see “Traffic Sign Recognition (TSR)” System fault See Owner’s Manual This warning appears if there is a malfunction in one of the following systems: Automatic Emergency Braking (AEB) with Pedestrian Detection; Intelligent Forward Collision Warning (I-FCW). | |
| Vehicle ahead detection indicator | Amber* | This indicator appears when the Automatic Emergency Braking (AEB) with Pedestrian Detection system is engaged and has detected a vehicle. For additional information, see “Automatic Emergency Braking (AEB) with Pedestrian Detection”. | |
| Hill descent control system ON indicator light | Green* | When the ignition switch is placed in the ON position, this light comes on briefly and then turns off. The light comes on when the hill descent control system is activated. If the hill descent control switch is on and the indicator light blinks, the system may be disabled. You may feel or hear the system working; this is normal. | |
| Front fog light indicator light (green) | Green | The front fog light indicator light illuminates when the front fog lights are on. For additional information, see “Fog light switch”. | |
| High Beam Assist indicator light (green) | Green | This indicator light illuminates when the headlights come on while the headlight switch is in the AUTO position with the high beams selected. This indicates that the high beam assist is operational. For additional information, see “Headlight. | |
| Side light and headlight indicator light (green) | Green | The side light and headlight indicator light illuminates when the side light or headlight position is selected. For additional information, see “Headlight switch”. | |
| TOW mode ON indicator light (green) | Green | This light comes on when the tow mode function is on. Both lights flash when the hazard switch is turned on. | |
| Cruise control indicator | Green* | This indicator shows the cruise control system status. For additional information, see “Cruise control” Currently unavailable This message may appear when the Intelligent Cruise Control (ICC) system is engaged. Under the following conditions, the ICC system is automatically cancelled: When the VDC operates.; When a wheel slips.; When the VDC system is turned off. | |
| High beam indicator light (blue) | Blue | This blue light comes on when the headlight high beams are on and goes out when the low beams are selected. The high beam indicator light also comes on when the passing signal is activated. |
Source: 2020 Nissan Titan Owner's Manual; 2021 Nissan Titan Owner's Manual; 2022 Nissan Titan Owner's Manual and others. * Usual colour; the manual text doesn't state it.
2015 to 2019 Titan warning lights
Anti-lock Braking System (ABS) warning light
Check soon · usual colour
The manual says: When the ignition switch is placed in the ON position, the ABS warning light illuminates and then turns off. This indicates the ABS is operational. If the ABS warning light illuminates while the engine is running or while driving, it may indicate the ABS is not functioning properly. If an ABS malfunction occurs, the anti-lock function is turned off.
What to do: Have the system checked. It is recommended that you visit a NISSAN dealer for this service.
Automatic Transmission check warning light
Check soon · usual colour
The manual says: When the ignition switch is placed in the ON position, the light comes on for about 2 seconds. If the light comes on at any other time, it may indicate the automatic transmission system is not functioning properly. It is recommended that you visit a NISSAN.
What to do: Have the system checked.
Automatic Transmission oil temperature warning light
Check soon · usual colour
The manual says: This light comes on when the automatic transmission oil temperature is too high. If the light comes on while driving, reduce the vehicle speed as soon as safely possible until the light turns off. CAUTION Continued vehicle operation when the A/T oil temperature warning light is on may damage the automatic transmission.
What to do: Pull over and let it cool with the engine idling. If the light stays on, have it checked before driving far.
Brake warning light
Stop safely · usual colour
The manual says: This light functions for both the parking.
What to do: Check the parking brake is fully released. If the light stays on, the brakes may not work properly: stop and get help rather than driving on.
Parking brake indicator
Stop safely · usual colour
The manual says: When the ignition switch is placed in the ON position, the light comes on when the park.
What to do: Release the parking brake before driving. If it flashes or will not release, see a dealer.
Low brake fluid warning light
Stop safely · usual colour
The manual says: When the ignition switch is placed in the ON position, the light warns of a low brake fluid level. If the light comes on while the engine is running, with the parking brake not applied, stop the vehicle and perform the following: 1. For additional information, refer to “Brake fluid” in the “Doit-yourself” section of this manual. 2. If the brake fluid level is correct, have the warning system checked.
What to do: Check the brake fluid level. Add brake fluid as necessary. It is recommended that you visit a NISSAN dealer for this service.
Charge warning light
Stop safely · usual colour
The manual says: If this light comes on while the engine is running, it may indicate the charging system is not functioning properly. If the belt is loose, broken, missing, or if the light remains on, have the system checked. CAUTION ∙Do not ground electrical accessories directly to the battery terminal. Doing so will bypass the variable voltage control system (if so equipped) and the vehicle battery may not charge completely.
What to do: Turn the engine off and check the generator belt. It is recommended that you visit a NISSAN dealer for this service.
More about the battery / charging system light · Shop jump starters on Amazon
Door open warning light
Stop safely · usual colour
The manual says: This light comes on when any of the doors are not closed securely while the ignition.
What to do: Stop and close every door firmly.
Engine oil pressure warning light
Stop safely · usual colour
The manual says: This light warns of low engine oil pressure.If the light flickers or comes on during normal driving, pull off the road in a safe area, stop the engine immediately, and call a NISSAN dealer or other authorized repair shop. The engine oil pressure warning light is not designed to indicate a low oil level. Use the dipstick to check the oil level.
What to do: Pull over safely and turn the engine off. Check the oil level when the engine has cooled. If the level is fine and the light stays on, have it towed.
More about the oil pressure warning light · Shop engine oils on Amazon
Malfunction warning light (red)
Stop safely
The manual says: If this warning light illuminates this indicates either the coolant temperature is above a critical threshold or the exhaust temperatures are above a critical threshold. When illuminated this lamp indicates the need to stop the engine as soon as it can be safely done. The engine must remain shut down until the engine can be repaired. For additional information, refer to the Titan Diesel Owner’s Manual.
Master warning light
Check soon · usual colour
The manual says: This light comes on when various vehicle information display warnings appear. ∙No key warning ∙Low fuel warning ∙Low windshield-washer fluid warning ∙Parking brake release warning ∙Door open warning ∙Loose fuel cap warning ∙Check tire pressure warning ∙4WD error (if so equipped) ∙Front & rear tire size differences (if so.
What to do: Read the message on the multi-information display. Red means stop safely; amber means get it checked.
Equipped) Passenger seat belt warning light
Information · usual colour
The manual says: The light reminds you to notify the passenger to fasten their seat belt. The light illuminates whenever the ignition is placed in the ON or START position and remains illuminated until the passenger’s seat belt is fastened. The light will remain on for a period of time when the vehicle is shifted out of P (Park) and the passenger seat belt is unfastened.
What to do: Fasten all seat belts. If it stays on with everyone belted, a heavy bag on a seat can trigger it.
Supplemental air bag warning light
Check soon · usual colour
The manual says: When the ignition switch is placed in the ON or START position, the supplemental air bag warning light illuminates for about 7 seconds and then turns off. This means the system is operational. If any of the following conditions occur, the front air bag, side air bag, curtain air bag, and pretensioner seat belt systems need servicing: ∙The supplemental air bag warning light remains on after approximately 7 seconds.
What to do: The car drives normally, but get it checked soon. Do not try to repair airbag parts yourself.
Electronic locking rear differential (E-Lock) system ON indicator light
Check soon · usual colour
The manual says: This light comes on when the electronic locking rear differential (E-Lock) system clutch is fully engaged. The indicator light flashes when the system is first turned on.When the system fully engages, the light remains on. If the switch is on and the indicator light continues to flash, the system is not engaged.
Front fog light indicator light
Information · usual colour
The manual says: The front fog light indicator light illuminates when the front fog lights are on. For additional information, refer to “Fog light.
What to do: Turn them off when visibility is good, as they can dazzle other drivers.
Front passenger air bag status light
Check soon · usual colour
The manual says: The front passenger air bag status light will be lit and the passenger front air bag will be off depending on how the front passenger seat is being used. For additional information, refer to “Front passenger air bag and status light” in the “Safety — Seats, seat belts and supplemental restraint system” section of this manual.
What to do: The car drives normally, but get it checked soon. Do not try to repair airbag parts yourself.
High beam indicator light (blue)
Information
The manual says: This blue light comes on when the headlight high beams are on and goes out when the low beams are selected. The high beam indicator light also comes on when the passing signal is activated.
What to do: Dip them for oncoming traffic and when following another car.
Hill descent control system ON indicator light
Information · usual colour
The manual says: When the ignition switch is placed in the ON position, this light comes on briefly and then turns off. The light comes on when the hill descent control system is activated. If the hill descent control switch is on and the indicator light blinks, the system may be disabled. You may feel or hear the system working; this is normal.
What to do: Have the system checked. It is recommended that you visit a NISSAN dealer for this service.
Malfunction Indicator Light (MIL) (yellow)
Check soon
The manual says: If this indicator light comes on steady or blinks while the engine is running, it may indicate a potential emission control malfunction. If this indicator light comes on steady for 20 seconds and then blinks for 10 seconds when the engine is not running, it indicates that the vehicle is not ready for an emission control system inspection/maintenance test.
What to do: Check the fuel-filler cap if the Loose Fuel Cap warning appears in the vehicle information display. It is recommended that you visit a NISSAN dealer for this service.
More about the check engine light · Shop OBD2 scanners on Amazon
Security indicator light
Check soon · usual colour
The manual says: This light blinks whenever the ignition switch is placed in the LOCK, OFF or ACC position. This function indicates the security system equipped on the vehicle is operational. For additional information,refer to “Security.
What to do: Hold the key fob against the start button and start again. If it keeps happening, replace the key fob battery.
More about the key / immobilizer light · Shop key fob batterys on Amazon
Side light and headlight indicator light (green)
Information
The manual says: The side light and headlight indicator light illuminates when the side light or headlight position is selected. For additional information, refer to “Headlight switch” in this sec.
What to do: Nothing to do.
Slip indicator light
Information
The manual says: This indicator will blink when the Vehicle Dynamic Control (VDC) system is operating, thus alerting that the vehicle is nearing its traction limits. The road surface may be.
What to do: If it flashes, ease off and drive gently for the conditions. If it stays on, have the system checked.
TOW mode ON indicator light
Information
The manual says: This light comes on when the tow mode function is on. Both lights flash when the hazard switch is.
What to do: Turn signal/hazard indicator lights The appropriate light flashes when the turn signal switch is activated.
Vehicle Dynamic Control (VDC) OFF indicator light
Information
The manual says: This indicator light comes on when the VDC OFF switch is pushed to off. This indicates the VDC system is not operating. Push the VDC OFF switch again or restart the engine and the system will operate normally. For additional information, refer to “Vehicle Dynamic Control (VDC) system” in the “Starting and driving” section of this manual.
What to do: It is recommended that you visit a NISSAN dealer for this service.
Brightness indicator
Check soon · usual colour
The manual says: This indicator appears when the vehicle information display screen brightness is being adjusted. Low Outside Temperature This warning appears if the outside temperature is below 37°F (3°C). The temperature can be changed to display in Celsius or Fahrenheit. For additional information, refer to “Settings” in this section.
What to do: Check the fuel level and refuel if needed. It is recommended that you visit a NISSAN dealer for this service. Add windshield-washer fluid as necessary.
Cruise control indicator
Information · usual colour
The manual says: This indicator shows the cruise control system status. For additional information, refer to “Cruise control” in the “Starting and driving” section of this manual. 4WD shift indicators (if so equipped) These indicators show which 4WD mode is selected. For additional information, refer to “Using 4–wheel drive (4WD)” in the “Starting and driving” section of this manual.
What to do: Check that all the tire sizes are the same, that the tire pressure is correct and that the tires are not excessively worn. It is recommended that you visit a NISSAN dealer for this service. Make sure the Intelligent Key is inside the vehicle. It is recommended that you visit a NISSAN dealer for this service.
| Light | Colour | Meaning | |
|---|---|---|---|
| Brake warning light | Red* | This light functions for both the parking. | |
| Parking brake indicator | Red* | When the ignition switch is placed in the ON position, the light comes on when the park. | |
| Low brake fluid warning light | Red* | When the ignition switch is placed in the ON position, the light warns of a low brake fluid level. If the light comes on while the engine is running, with the parking brake not applied, stop the vehicle and perform the following: 1. For additional information, refer to “Brake fluid” in the “Doit-yourself” section of this manual. 2. If the brake fluid level is correct, have the warning system checked. | |
| Charge warning light | Red* | If this light comes on while the engine is running, it may indicate the charging system is not functioning properly. If the belt is loose, broken, missing, or if the light remains on, have the system checked. CAUTION ∙Do not ground electrical accessories directly to the battery terminal. Doing so will bypass the variable voltage control system (if so equipped) and the vehicle battery may not charge completely. | |
| Door open warning light | Red* | This light comes on when any of the doors are not closed securely while the ignition. | |
| Engine oil pressure warning light | Red* | This light warns of low engine oil pressure.If the light flickers or comes on during normal driving, pull off the road in a safe area, stop the engine immediately, and call a NISSAN dealer or other authorized repair shop. The engine oil pressure warning light is not designed to indicate a low oil level. Use the dipstick to check the oil level. | |
| Malfunction warning light (red) | Red | If this warning light illuminates this indicates either the coolant temperature is above a critical threshold or the exhaust temperatures are above a critical threshold. When illuminated this lamp indicates the need to stop the engine as soon as it can be safely done. The engine must remain shut down until the engine can be repaired. For additional information, refer to the Titan Diesel Owner’s Manual. | |
| Anti-lock Braking System (ABS) warning light | Amber* | When the ignition switch is placed in the ON position, the ABS warning light illuminates and then turns off. This indicates the ABS is operational. If the ABS warning light illuminates while the engine is running or while driving, it may indicate the ABS is not functioning properly. If an ABS malfunction occurs, the anti-lock function is turned off. | |
| Automatic Transmission check warning light | Amber* | When the ignition switch is placed in the ON position, the light comes on for about 2 seconds. If the light comes on at any other time, it may indicate the automatic transmission system is not functioning properly. It is recommended that you visit a NISSAN. | |
| Automatic Transmission oil temperature warning light | Amber* | This light comes on when the automatic transmission oil temperature is too high. If the light comes on while driving, reduce the vehicle speed as soon as safely possible until the light turns off. CAUTION Continued vehicle operation when the A/T oil temperature warning light is on may damage the automatic transmission. | |
| Master warning light | Amber* | This light comes on when various vehicle information display warnings appear. ∙No key warning ∙Low fuel warning ∙Low windshield-washer fluid warning ∙Parking brake release warning ∙Door open warning ∙Loose fuel cap warning ∙Check tire pressure warning ∙4WD error (if so equipped) ∙Front & rear tire size differences (if so. | |
| Supplemental air bag warning light | Amber* | When the ignition switch is placed in the ON or START position, the supplemental air bag warning light illuminates for about 7 seconds and then turns off. This means the system is operational. If any of the following conditions occur, the front air bag, side air bag, curtain air bag, and pretensioner seat belt systems need servicing: ∙The supplemental air bag warning light remains on after approximately 7 seconds. | |
| Electronic locking rear differential (E-Lock) system ON indicator light | Amber* | This light comes on when the electronic locking rear differential (E-Lock) system clutch is fully engaged. The indicator light flashes when the system is first turned on.When the system fully engages, the light remains on. If the switch is on and the indicator light continues to flash, the system is not engaged. | |
| Front passenger air bag status light | Amber* | The front passenger air bag status light will be lit and the passenger front air bag will be off depending on how the front passenger seat is being used. For additional information, refer to “Front passenger air bag and status light” in the “Safety — Seats, seat belts and supplemental restraint system” section of this manual. | |
| Malfunction Indicator Light (MIL) (yellow) | Amber | If this indicator light comes on steady or blinks while the engine is running, it may indicate a potential emission control malfunction. If this indicator light comes on steady for 20 seconds and then blinks for 10 seconds when the engine is not running, it indicates that the vehicle is not ready for an emission control system inspection/maintenance test. | |
| Security indicator light | Amber* | This light blinks whenever the ignition switch is placed in the LOCK, OFF or ACC position. This function indicates the security system equipped on the vehicle is operational. For additional information,refer to “Security. | |
| Brightness indicator | Amber* | This indicator appears when the vehicle information display screen brightness is being adjusted. Low Outside Temperature This warning appears if the outside temperature is below 37°F (3°C). The temperature can be changed to display in Celsius or Fahrenheit. For additional information, refer to “Settings” in this section. | |
| Equipped) Passenger seat belt warning light | Green* | The light reminds you to notify the passenger to fasten their seat belt. The light illuminates whenever the ignition is placed in the ON or START position and remains illuminated until the passenger’s seat belt is fastened. The light will remain on for a period of time when the vehicle is shifted out of P (Park) and the passenger seat belt is unfastened. | |
| Front fog light indicator light | Green* | The front fog light indicator light illuminates when the front fog lights are on. For additional information, refer to “Fog light. | |
| Hill descent control system ON indicator light | Green* | When the ignition switch is placed in the ON position, this light comes on briefly and then turns off. The light comes on when the hill descent control system is activated. If the hill descent control switch is on and the indicator light blinks, the system may be disabled. You may feel or hear the system working; this is normal. | |
| Side light and headlight indicator light (green) | Green | The side light and headlight indicator light illuminates when the side light or headlight position is selected. For additional information, refer to “Headlight switch” in this sec. | |
| Slip indicator light | Green | This indicator will blink when the Vehicle Dynamic Control (VDC) system is operating, thus alerting that the vehicle is nearing its traction limits. The road surface may be. | |
| TOW mode ON indicator light | Green | This light comes on when the tow mode function is on. Both lights flash when the hazard switch is. | |
| Vehicle Dynamic Control (VDC) OFF indicator light | Green | This indicator light comes on when the VDC OFF switch is pushed to off. This indicates the VDC system is not operating. Push the VDC OFF switch again or restart the engine and the system will operate normally. For additional information, refer to “Vehicle Dynamic Control (VDC) system” in the “Starting and driving” section of this manual. | |
| Cruise control indicator | Green* | This indicator shows the cruise control system status. For additional information, refer to “Cruise control” in the “Starting and driving” section of this manual. 4WD shift indicators (if so equipped) These indicators show which 4WD mode is selected. For additional information, refer to “Using 4–wheel drive (4WD)” in the “Starting and driving” section of this manual. | |
| High beam indicator light (blue) | Blue | This blue light comes on when the headlight high beams are on and goes out when the low beams are selected. The high beam indicator light also comes on when the passing signal is activated. |
Source: 2015 Nissan Titan Owner's Manual; 2016 Nissan Titan Owner's Manual; 2017 Nissan Titan Owner's Manual and others. * Usual colour; the manual text doesn't state it.
2010 to 2014 Titan warning lights
Master warning light
Check soon · usual colour
The manual says: This light comes on when various vehicle information display warnings appear.; No key warning; Low fuel warning; Low windshield-washer fluid warning; Parking brake release warning; Door open warning.
What to do: Read the message on the multi-information display. Red means stop safely; amber means get it checked.
Supplemental air bag warning light
Check soon · usual colour
The manual says: When the ignition switch is placed in the ON or START position, the supplemental air bag warning light illuminates for about 7 seconds and then turns off. This means the system is operational.
What to do: The car drives normally, but get it checked soon. Do not try to repair airbag parts yourself.
Electronic locking rear differential (E-Lock) system on indicator light
Check soon · usual colour
The manual says: This light comes on when the electronic locking rear differential (E-Lock) system clutch is fully engaged. The indicator light flashes when the system is first turned on. When the system fully engages, the 2-18 Instruments and controls.
Front passenger air bag status light
Check soon · usual colour
The manual says: The front passenger air bag status light will be lit and the passenger front air bag will be OFF depending on how the front passenger seat is being used. For front passenger air bag status light operation, see “Front passenger air bag and status light” in the “Safety — Seats, seat belts and supplemental restraint system” section of this manual.
What to do: The car drives normally, but get it checked soon. Do not try to repair airbag parts yourself.
High beam indicator light (blue)
Information
The manual says: This blue light comes on when the headlight high beams are on and goes out when the low beams are selected. The high beam indicator light also comes on when the passing signal is activated.
What to do: Dip them for oncoming traffic and when following another car.
Malfunction Indicator Light (MIL)
Check soon · usual colour
The manual says: If this indicator light comes on steady or blinks while the engine is running, it may indicate a potential emission control malfunction. The Malfunction Indicator Light may also come on steady if the fuel-filler cap is loose or missing, or if the vehicle runs out of fuel. 4 liters) of fuel in the fuel tank.
What to do: Check to make sure the fuel-filler cap is installed and closed tightly, and that the vehicle has at least 3 gallons (11. Check the fuel-filler cap if the LOOSE FUEL CAP warning appears in the vehicle information display. Have the vehicle inspected by a NISSAN dealer.
More about the check engine light · Shop OBD2 scanners on Amazon
Security indicator light
Check soon · usual colour
The manual says: This light blinks whenever the ignition switch is in the LOCK, OFF or ACC position. This function indicates the security system equipped on the vehicle is operational. For additional information, see “Security sys.
What to do: Hold the key fob against the start button and start again. If it keeps happening, replace the key fob battery.
More about the key / immobilizer light · Shop key fob batterys on Amazon
Slip indicator light
Check soon · usual colour
The manual says: This indicator will blink when the VDC system or the traction control system is operating, thus alerting that the vehicle is nearing its traction limits. The road surface may be slippery. Both lights flash when the hazard switch is turned.
What to do: Turn signal/hazard indicator lights The appropriate light flashes when the turn signal switch is activated.
Vehicle Dynamic Control (VDC) off indicator light
Check soon · usual colour
The manual says: This indicator light comes on when the Vehicle Dynamic Control off switch is pushed to OFF, the transfer case is in the 4LO position ( model), or when the Vehicle Dynamic Control system is not functioning properly. This indicates the Vehicle Dynamic Control system is not operating. Push the Vehicle Dynamic Control off switch again or restart the engine and the system will operate normally.
What to do: Turn it back on unless you are stuck in snow or mud. It normally turns on again with the next start.
Cruise set switch indicator
Information · usual colour
The manual says: This indicator illuminates while the vehicle speed is controlled by the cruise control system. If the indicator blinks while the engine is running, it may indicate the cruise control system is not functioning properly. Have the system checked by a.
What to do: Nothing to do.
Transfer 4LO position indicator ( model)
Information · usual colour
The manual says: This indicator illuminates when the 4WD shift switch is set in the 4LO position with the ignition switch placed in the ON position. If the 4WD shift switch is set in the 4LO position and the indicator blinks, stop the vehicle, drive slowly forward and the indicator will turn on.
What to do: Make sure the transfer 4LO position indicator illuminates when you shift the 4WD shift switch to 4LO.
| Light | Colour | Meaning | |
|---|---|---|---|
| Master warning light | Amber* | This light comes on when various vehicle information display warnings appear.; No key warning; Low fuel warning; Low windshield-washer fluid warning; Parking brake release warning; Door open warning. | |
| Supplemental air bag warning light | Amber* | When the ignition switch is placed in the ON or START position, the supplemental air bag warning light illuminates for about 7 seconds and then turns off. This means the system is operational. | |
| Electronic locking rear differential (E-Lock) system on indicator light | Amber* | This light comes on when the electronic locking rear differential (E-Lock) system clutch is fully engaged. The indicator light flashes when the system is first turned on. When the system fully engages, the 2-18 Instruments and controls. | |
| Front passenger air bag status light | Amber* | The front passenger air bag status light will be lit and the passenger front air bag will be OFF depending on how the front passenger seat is being used. For front passenger air bag status light operation, see “Front passenger air bag and status light” in the “Safety — Seats, seat belts and supplemental restraint system” section of this manual. | |
| Malfunction Indicator Light (MIL) | Amber* | If this indicator light comes on steady or blinks while the engine is running, it may indicate a potential emission control malfunction. The Malfunction Indicator Light may also come on steady if the fuel-filler cap is loose or missing, or if the vehicle runs out of fuel. 4 liters) of fuel in the fuel tank. | |
| Security indicator light | Amber* | This light blinks whenever the ignition switch is in the LOCK, OFF or ACC position. This function indicates the security system equipped on the vehicle is operational. For additional information, see “Security sys. | |
| Slip indicator light | Amber* | This indicator will blink when the VDC system or the traction control system is operating, thus alerting that the vehicle is nearing its traction limits. The road surface may be slippery. Both lights flash when the hazard switch is turned. | |
| Vehicle Dynamic Control (VDC) off indicator light | Amber* | This indicator light comes on when the Vehicle Dynamic Control off switch is pushed to OFF, the transfer case is in the 4LO position ( model), or when the Vehicle Dynamic Control system is not functioning properly. This indicates the Vehicle Dynamic Control system is not operating. Push the Vehicle Dynamic Control off switch again or restart the engine and the system will operate normally. | |
| Cruise set switch indicator | Green* | This indicator illuminates while the vehicle speed is controlled by the cruise control system. If the indicator blinks while the engine is running, it may indicate the cruise control system is not functioning properly. Have the system checked by a. | |
| Transfer 4LO position indicator ( model) | Green* | This indicator illuminates when the 4WD shift switch is set in the 4LO position with the ignition switch placed in the ON position. If the 4WD shift switch is set in the 4LO position and the indicator blinks, stop the vehicle, drive slowly forward and the indicator will turn on. | |
| High beam indicator light (blue) | Blue | This blue light comes on when the headlight high beams are on and goes out when the low beams are selected. The high beam indicator light also comes on when the passing signal is activated. |
Source: 2010 Nissan Titan Owner's Manual; 2011 Nissan Titan Owner's Manual; 2012 Nissan Titan Owner's Manual and others. * Usual colour; the manual text doesn't state it.
More for the Titan
Nissan Titan key fob battery size · All Nissan dashboard symbols