Nissan Maxima dashboard symbols and warning lights
Every light in the Nissan Maxima owner's manual, 2010 to 2023. Tap a light to see what it means and what to do. Red means stop safely, amber means get it checked soon.
2021 to 2023 Maxima warning lights
Brake warning light
Stop safely · usual colour
The manual says: This light functions for both the parking.
What to do: Check the parking brake is fully released. If the light stays on, the brakes may not work properly: stop and get help rather than driving on.
Parking brake indicator
Stop safely · usual colour
The manual says: When the ignition switch is placed in the ON position, this light comes on when the.
What to do: Release the parking brake before driving. If it flashes or will not release, see a dealer.
Low brake fluid warning light
Stop safely · usual colour
The manual says: When the ignition switch is placed in the ON position, the light warns of a low brake fluid level. If the light comes on while the engine is running with the parking brake not applied, stop the vehicle and perform the following: 1. For additional information, see “Brake fluid” 2. If the brake fluid level is correct, have the warning system checked. WARNING.
What to do: Check the brake fluid level. Add brake fluid as necessary. It is recommended that you visit a NISSAN dealer for this service. It is recommended that you visit a NISSAN dealer for this service.
Charge warning light
Stop safely · usual colour
The manual says: If this light comes on while the engine is running, it may indicate the charging system is not functioning properly. If the belt is loose, broken, or missing, or if the light remains on, have the system checked. CAUTION Do not continue driving if the generator.
What to do: Turn the engine off and check the generator belt. It is recommended that you visit a NISSAN dealer for this service.
More about the battery / charging system light · Shop jump starters on Amazon
Engine oil pressure warning light
Stop safely · usual colour
The manual says: This light warns of low engine oil pressure. If the light flickers or comes on during normal driving, pull off the road in a safe area, stop the engine immediately and call a NISSAN dealer or other authorized repair shop. The engine oil pressure warning light is not designed to indicate a low oil level. Use the dipstick to check the oil level.
What to do: Pull over safely and turn the engine off. Check the oil level when the engine has cooled. If the level is fine and the light stays on, have it towed.
More about the oil pressure warning light · Shop engine oils on Amazon
Master warning light
Check soon · usual colour
The manual says: The master warning light illuminates whenever there is an active warning that can be reviewed in the “warnings review” content page in the meter, or if there is a red-level warning being displayed (which cannot be dismissed). The master warning light will illuminate red if a red-level warning is being displayed, or yellow otherwise.; Door Open (with vehicle moving); Parking Brake ON.
What to do: Read the message on the multi-information display. Red means stop safely; amber means get it checked.
Security indicator light
Check soon · usual colour
The manual says: This light blinks when the ignition switch is placed in the OFF, LOCK or ACC position. The blinking security indicator light indicates that the security systems equipped on the vehicle are operational. For additional information, see “Security.
What to do: Hold the key fob against the start button and start again. If it keeps happening, replace the key fob battery.
More about the key / immobilizer light · Shop key fob batterys on Amazon
Supplemental air bag warning light
Check soon
The manual says: When the ignition switch is placed in the ON position, the supplemental air bag warning light illuminates for about 7 seconds and then turns off. This means the system is operational. If any of the following conditions occur, the front air bag, side air bag, curtain air bag, and pretensioner seat belt systems need servicing: The supplemental air bag warning light remains on after approximately 7 seconds.
What to do: It is recommended that you visit a NISSAN dealer for these services. It is recommended that you visit a NISSAN dealer for this service.
Anti-lock Braking System (ABS) warning light
Check soon · usual colour
The manual says: When the ignition switch is placed in the ON position, the ABS warning light illuminates and then turns off. This indicates the ABS is operational. If the ABS warning light illuminates while the engine is running or while driving, it may indicate the ABS is not functioning properly. If an ABS malfunction occurs, the anti-lock function is turned off.
What to do: Have the system checked. It is recommended that you visit a NISSAN dealer for this service.
Automatic Emergency Braking (AEB) with Pedestrian Detection system warning light
Check soon · usual colour
The manual says: This light comes on when the ignition switch is placed in the ON position. It turns off after the engine is started. This light illuminates when the AEB with Pedestrian Detection system is set to OFF in the vehicle information display. If the light illuminates when the AEB with Pedestrian Detection system is on, it may indicate that the system is unavailable.
What to do: Clean the windshield and front grille sensor. If it stays on in clear weather, have it checked.
Front passenger air bag status light
Check soon · usual colour
The manual says: The front passenger air bag status light will be lit and the passenger front air bag will be off depending on how the front passenger seat is being used. For additional information, see “Front passenger air bag and status light” Low tire pressure warning light Your vehicle is equipped with a Tire Pressure Monitoring System (TPMS) that monitors the tire pressure of all tires except the spare.
What to do: Add Air” warning also appears in the vehicle information display. Add Air” warning appears each time the ignition switch is placed in the ON position as long as the low tire pressure warning light remains illuminated. Have the system checked. It is recommended that you visit a NISSAN dealer for this service.
Malfunction Indicator Light (MIL)
Check soon · usual colour
The manual says: If this indicator light comes on steady or blinks while the engine is running, it may indicate a potential emission control malfunction. The MIL may also come on steady if the fuel-filler cap is loose or missing, or if the vehicle runs out of fuel. 4 liters) of fuel in the fuel tank. After a few driving trips, the light should turn off if no other potential emission control system malfunction exists.
What to do: Check to make sure the fuel-filler cap is installed and closed tightly, and that the vehicle has at least 3 gallons (11.
More about the check engine light · Shop OBD2 scanners on Amazon
Rear Automatic Braking (RAB) system warning light
Check soon · usual colour
The manual says: This light comes on when the ignition switch is placed in the ON position. It turns off after the engine is started. This light illuminates when the RAB system is turned off in the vehicle information display. If the light illuminates when the RAB system is on, it may indicate that the system is unavailable. For additional information, see “Rear Automatic Braking (RAB)”.
What to do: Clean the windshield and front grille sensor. If it stays on in clear weather, have it checked.
Slip indicator light
Check soon · usual colour
The manual says: This indicator light will blink when the Vehicle Dynamic Control (VDC) system is operating, thus alerting the driver to the fact that the road surface is slippery and the vehicle is nearing its traction limits. You may feel or hear the system working; this is normal. The light will blink for a few seconds after the VDC system stops limiting wheel spin.
What to do: If it flashes, ease off and drive gently for the conditions. If it stays on, have the system checked.
Vehicle Dynamic Control (VDC) OFF indicator light
Check soon · usual colour
The manual says: This indicator light comes on when the VDC OFF switch is pushed to off. This indicates the VDC system has been turned off. Push the VDC OFF switch again or restart the engine and the system will operate normally. For additional information, see “Vehicle Dynamic Control (VDC) system”.
What to do: Turn it back on unless you are stuck in snow or mud. It normally turns on again with the next start.
Front fog light indicator light (green)
Information
The manual says: The front fog light indicator light illuminates when the front fog lights are on. For additional information, see “Fog light.
What to do: Turn them off when visibility is good, as they can dazzle other drivers.
High Beam Assist indicator light (green)
Information
The manual says: This indicator light illuminates when the headlights come on while the headlight switch is in the AUTO position with the high beams selected. This indicates that the high beam assist is operational. For additional information, see “Headlight.
What to do: Dip them for oncoming traffic and when following another car.
High beam indicator light (blue)
Information
The manual says: This blue light comes on when the headlight high beams are on and goes out when.
What to do: Dip them for oncoming traffic and when following another car.
Side light and headlight indicator light (green)
Information
The manual says: The side light and headlight indicator light illuminates when the side light or headlights are on (not including the Daytime Running Lights system or signature lights). If the headlight switch is in the AUTO position, the side light and headlight indicator light will illuminate when the headlights turn on.
What to do: Turn signal/hazard indicator lights (green) The appropriate light flashes when the turn signal switch is activated.
Brightness indicator
Check soon · usual colour
The manual says: This indicator shows the brightness adjustment of the instrument panel. For additional information, see “Instrument brightness control” Rear Door Alert is activated When the system is enabled, this message appears when the Rear Door Alert system is active and can remind the driver to check the rear seat. 2-26 Instruments and controls.
Transmission Shift Position indicator
Check soon · usual colour
The manual says: This indicator shows the transmission shift position. CVT Error: See Owner's Manual This warning appears when there is a problem with the CVT system. If this warning appears, have the system checked.
What to do: It is recommended that you visit a NISSAN dealer for this service.
Blind Spot Warning (BSW) and Rear Cross Traffic Alert (RCTA) indicator
Check soon · usual colour
The manual says: This indicator appears when the BSW and RCTA systems are engaged. For additional information, see “Blind Spot Warning (BSW)” and “Rear Cross Traffic Alert (RCTA)” Chassis Control System Error: See Owner’s Manual This warning appears if the Integrated Dynamics-control Module detects an error in the Intelligent Trace Control, Intelligent Engine Brake, or the Active Ride Control systems.
What to do: Have the system checked. It is recommended that you visit a NISSAN dealer for this service.
Cruise control indicator
Information · usual colour
The manual says: This indicator shows the cruise control system status. When cruise control is activated, a green circle will appear to indicate it is set. The vehicle information display will also display the speed the cruise control was set at. If you accelerate past the set speed, the speed will blink until you either cancel cruise control or go back to the set speed.
What to do: Nothing to do.
5-96) Intelligent Cruise Control (ICC) indicator
Information · usual colour
The manual says: This indicator shows the Intelligent Cruise Control (ICC) system status. The status is shown by the color. For additional information, see “Intelligent Cruise Control (ICC)” Intelligent Cruise ON This message appears if the Intelligent Cruise Control (ICC) switch on the steering wheel is pressed and Cruise Control Alerts are enabled in the vehicle information display. For additional information, see “Intelligent.
What to do: Nothing to do.
Lane Departure Warning (LDW) indicator
Check soon · usual colour
The manual says: This indicator appears when the LDW and Intelligent Lane Intervention (I-LI) systems are engaged. This indicator will display orange if there is a LDW, or I-LI system malfunction.
What to do: If amber, clean the windshield in front of the camera. If it stays amber, have it checked.
Rear Automatic Braking (RAB) system warning indicator
Check soon · usual colour
The manual says: This indicator appears to indicate the status of the Rear Automatic Braking (RAB) system. For additional information, see “Rear Automatic Braking (RAB)”.
What to do: Clean the windshield and front grille sensor. If it stays on in clear weather, have it checked.
Speed Limit Sign indicator
Check soon · usual colour
The manual says: This message may appear when the Traffic Sign Recognition system is engaged. For additional information, see “Traffic Sign Recognition (TSR)” Unavailable: High Cabin Temperature This message appears when the camera detects an interior temperature of more than 104°F (40°C).
Vehicle ahead detection indicator
Check soon · usual colour
The manual says: This indicator appears when the Automatic Emergency Braking (AEB) with Pedestrian Detection system is engaged and has detected a vehicle. For additional information, see “Automatic Emergency Braking (AEB) with Pedestrian Detection ” 2-32 Instruments and controls.
| Light | Colour | Meaning | |
|---|---|---|---|
| Brake warning light | Red* | This light functions for both the parking. | |
| Parking brake indicator | Red* | When the ignition switch is placed in the ON position, this light comes on when the. | |
| Low brake fluid warning light | Red* | When the ignition switch is placed in the ON position, the light warns of a low brake fluid level. If the light comes on while the engine is running with the parking brake not applied, stop the vehicle and perform the following: 1. For additional information, see “Brake fluid” 2. If the brake fluid level is correct, have the warning system checked. WARNING. | |
| Charge warning light | Red* | If this light comes on while the engine is running, it may indicate the charging system is not functioning properly. If the belt is loose, broken, or missing, or if the light remains on, have the system checked. CAUTION Do not continue driving if the generator. | |
| Engine oil pressure warning light | Red* | This light warns of low engine oil pressure. If the light flickers or comes on during normal driving, pull off the road in a safe area, stop the engine immediately and call a NISSAN dealer or other authorized repair shop. The engine oil pressure warning light is not designed to indicate a low oil level. Use the dipstick to check the oil level. | |
| Master warning light | Amber* | The master warning light illuminates whenever there is an active warning that can be reviewed in the “warnings review” content page in the meter, or if there is a red-level warning being displayed (which cannot be dismissed). The master warning light will illuminate red if a red-level warning is being displayed, or yellow otherwise.; Door Open (with vehicle moving); Parking Brake ON. | |
| Security indicator light | Amber* | This light blinks when the ignition switch is placed in the OFF, LOCK or ACC position. The blinking security indicator light indicates that the security systems equipped on the vehicle are operational. For additional information, see “Security. | |
| Supplemental air bag warning light | Amber | When the ignition switch is placed in the ON position, the supplemental air bag warning light illuminates for about 7 seconds and then turns off. This means the system is operational. If any of the following conditions occur, the front air bag, side air bag, curtain air bag, and pretensioner seat belt systems need servicing: The supplemental air bag warning light remains on after approximately 7 seconds. | |
| Anti-lock Braking System (ABS) warning light | Amber* | When the ignition switch is placed in the ON position, the ABS warning light illuminates and then turns off. This indicates the ABS is operational. If the ABS warning light illuminates while the engine is running or while driving, it may indicate the ABS is not functioning properly. If an ABS malfunction occurs, the anti-lock function is turned off. | |
| Automatic Emergency Braking (AEB) with Pedestrian Detection system warning light | Amber* | This light comes on when the ignition switch is placed in the ON position. It turns off after the engine is started. This light illuminates when the AEB with Pedestrian Detection system is set to OFF in the vehicle information display. If the light illuminates when the AEB with Pedestrian Detection system is on, it may indicate that the system is unavailable. | |
| Front passenger air bag status light | Amber* | The front passenger air bag status light will be lit and the passenger front air bag will be off depending on how the front passenger seat is being used. For additional information, see “Front passenger air bag and status light” Low tire pressure warning light Your vehicle is equipped with a Tire Pressure Monitoring System (TPMS) that monitors the tire pressure of all tires except the spare. | |
| Malfunction Indicator Light (MIL) | Amber* | If this indicator light comes on steady or blinks while the engine is running, it may indicate a potential emission control malfunction. The MIL may also come on steady if the fuel-filler cap is loose or missing, or if the vehicle runs out of fuel. 4 liters) of fuel in the fuel tank. After a few driving trips, the light should turn off if no other potential emission control system malfunction exists. | |
| Rear Automatic Braking (RAB) system warning light | Amber* | This light comes on when the ignition switch is placed in the ON position. It turns off after the engine is started. This light illuminates when the RAB system is turned off in the vehicle information display. If the light illuminates when the RAB system is on, it may indicate that the system is unavailable. For additional information, see “Rear Automatic Braking (RAB)”. | |
| Slip indicator light | Amber* | This indicator light will blink when the Vehicle Dynamic Control (VDC) system is operating, thus alerting the driver to the fact that the road surface is slippery and the vehicle is nearing its traction limits. You may feel or hear the system working; this is normal. The light will blink for a few seconds after the VDC system stops limiting wheel spin. | |
| Vehicle Dynamic Control (VDC) OFF indicator light | Amber* | This indicator light comes on when the VDC OFF switch is pushed to off. This indicates the VDC system has been turned off. Push the VDC OFF switch again or restart the engine and the system will operate normally. For additional information, see “Vehicle Dynamic Control (VDC) system”. | |
| Brightness indicator | Amber* | This indicator shows the brightness adjustment of the instrument panel. For additional information, see “Instrument brightness control” Rear Door Alert is activated When the system is enabled, this message appears when the Rear Door Alert system is active and can remind the driver to check the rear seat. 2-26 Instruments and controls. | |
| Transmission Shift Position indicator | Amber* | This indicator shows the transmission shift position. CVT Error: See Owner's Manual This warning appears when there is a problem with the CVT system. If this warning appears, have the system checked. | |
| Blind Spot Warning (BSW) and Rear Cross Traffic Alert (RCTA) indicator | Amber* | This indicator appears when the BSW and RCTA systems are engaged. For additional information, see “Blind Spot Warning (BSW)” and “Rear Cross Traffic Alert (RCTA)” Chassis Control System Error: See Owner’s Manual This warning appears if the Integrated Dynamics-control Module detects an error in the Intelligent Trace Control, Intelligent Engine Brake, or the Active Ride Control systems. | |
| Lane Departure Warning (LDW) indicator | Amber* | This indicator appears when the LDW and Intelligent Lane Intervention (I-LI) systems are engaged. This indicator will display orange if there is a LDW, or I-LI system malfunction. | |
| Rear Automatic Braking (RAB) system warning indicator | Amber* | This indicator appears to indicate the status of the Rear Automatic Braking (RAB) system. For additional information, see “Rear Automatic Braking (RAB)”. | |
| Speed Limit Sign indicator | Amber* | This message may appear when the Traffic Sign Recognition system is engaged. For additional information, see “Traffic Sign Recognition (TSR)” Unavailable: High Cabin Temperature This message appears when the camera detects an interior temperature of more than 104°F (40°C). | |
| Vehicle ahead detection indicator | Amber* | This indicator appears when the Automatic Emergency Braking (AEB) with Pedestrian Detection system is engaged and has detected a vehicle. For additional information, see “Automatic Emergency Braking (AEB) with Pedestrian Detection ” 2-32 Instruments and controls. | |
| Front fog light indicator light (green) | Green | The front fog light indicator light illuminates when the front fog lights are on. For additional information, see “Fog light. | |
| High Beam Assist indicator light (green) | Green | This indicator light illuminates when the headlights come on while the headlight switch is in the AUTO position with the high beams selected. This indicates that the high beam assist is operational. For additional information, see “Headlight. | |
| Side light and headlight indicator light (green) | Green | The side light and headlight indicator light illuminates when the side light or headlights are on (not including the Daytime Running Lights system or signature lights). If the headlight switch is in the AUTO position, the side light and headlight indicator light will illuminate when the headlights turn on. | |
| Cruise control indicator | Green* | This indicator shows the cruise control system status. When cruise control is activated, a green circle will appear to indicate it is set. The vehicle information display will also display the speed the cruise control was set at. If you accelerate past the set speed, the speed will blink until you either cancel cruise control or go back to the set speed. | |
| 5-96) Intelligent Cruise Control (ICC) indicator | Green* | This indicator shows the Intelligent Cruise Control (ICC) system status. The status is shown by the color. For additional information, see “Intelligent Cruise Control (ICC)” Intelligent Cruise ON This message appears if the Intelligent Cruise Control (ICC) switch on the steering wheel is pressed and Cruise Control Alerts are enabled in the vehicle information display. For additional information, see “Intelligent. | |
| High beam indicator light (blue) | Blue | This blue light comes on when the headlight high beams are on and goes out when. |
Source: 2021 Nissan Maxima Owner's Manual; 2022 Nissan Maxima Owner's Manual; 2023 Nissan Maxima Owner's Manual. * Usual colour; the manual text doesn't state it.
2020 Maxima warning lights
Supplemental air bag warning light
Check soon · usual colour
The manual says: When the ignition switch is placed in the ON or START position, the supplemental air bag warning light illuminates for about 7 seconds and then turns off. This means the system is operational. If any of the following conditions occur, the front air bag, side air bag, curtain air bag, and pretensioner seat belt systems need servicing: ∙The supplemental air bag warning light remains on after approximately 7 seconds.
What to do: It is recommended that you visit a NISSAN dealer for these services.
Front fog light indicator light (green)
Information
The manual says: The front fog light indicator light illuminates when the front fog lights are on. For additional information, refer to “Fog light.
What to do: Turn them off when visibility is good, as they can dazzle other drivers.
Front passenger air bag status light
Check soon · usual colour
The manual says: The front passenger air bag status light will be lit and the passenger front air bag will be off depending on how the front passenger seat is being used.
What to do: The car drives normally, but get it checked soon. Do not try to repair airbag parts yourself.
High Beam Assist indicator light (green)
Information
The manual says: This indicator light illuminates when the headlights come on while the headlight switch is in the AUTO position with the high beams selected. This indicates that the high beam assist is operational. For additional information, refer to “Headlight and turn signal switch” in this section.
What to do: Dip them for oncoming traffic and when following another car.
High beam indicator light (blue)
Information
The manual says: This blue light comes on when the headlight high beams are on and goes out when.
What to do: Dip them for oncoming traffic and when following another car.
Malfunction Indicator Light (MIL)
Check soon · usual colour
The manual says: If this indicator light comes on steady or blinks while the engine is running, it may indicate a potential emission control malfunction. The MIL may also come on steady if the fuel-filler cap is loose or missing, or if the vehicle runs out of fuel. 4 liters) of fuel in the fuel tank. After a few driving trips, the light should turn off if no other potential emission control system malfunction exists.
What to do: Check to make sure the fuel-filler cap is installed and closed tightly, and that the vehicle has at least 3 gallons (11. Check the fuel-filler cap if the Loose Fuel Cap warning appears in the vehicle information display. It is recommended that you visit a NISSAN dealer for this service.
More about the check engine light · Shop OBD2 scanners on Amazon
Security indicator light
Check soon · usual colour
The manual says: This light blinks when the ignition switch is placed in the OFF, LOCK or ACC (if so equipped) position. The blinking security indicator light indicates that the security systems equipped on the vehicle are operational. For additional information,refer to “Security.
What to do: Hold the key fob against the start button and start again. If it keeps happening, replace the key fob battery.
More about the key / immobilizer light · Shop key fob batterys on Amazon
Side light and headlight indicator light (green)
Information
The manual says: The side light and headlight indicator light illuminates when the side light or headlights are on (not including the Daytime Running Lights system or signature lights). If the headlight switch is in the AUTO position, the side light and headlight indicator light will illuminate when the headlights turn on. For additional information, refer to “Headlight and turn signal switch” in this.
What to do: Nothing to do.
Slip indicator light
Information
The manual says: This indicator light will blink when the Vehicle Dynamic Control (VDC) system is operating, thus alerting the driver to the fact that the road surface is slippery and the vehicle is nearing its traction limits. You may feel or hear the system working; this is normal. The light will blink for a few seconds after the VDC system stops limiting wheel spin.
What to do: It is recommended that you visit a NISSAN dealer for this service. Turn signal/hazard indicator lights The appropriate light flashes when the turn signal switch is activated.
Vehicle Dynamic Control (VDC) OFF indicator light
Information
The manual says: This indicator light comes on when the VDC OFF switch is pushed to off. This indicates the VDC system has been turned off. Push the VDC OFF switch again or restart the engine and the system will operate normally. For additional information, refer to “Vehicle Dynamic Control (VDC) system” in the “Starting and driving” section of this manual.
What to do: Turn it back on unless you are stuck in snow or mud. It normally turns on again with the next start.
Brightness indicator
Check soon · usual colour
The manual says: This indicator shows the brightness adjustment of the instrument panel. For additional information, refer to “Instrument brightness control” in this section. Transmission Shift Position indicator This indicator shows the transmission shift position. Outside Temperature Display The outside temperature display appears in the center region of the vehicle information display.
Warning indicator
Check soon · usual colour
The manual says: This indicator illuminates to indicate the status of the Rear Automatic Braking (RAB) system. For additional information, refer to “Rear Automatic Braking (RAB)” in the “Starting and driving” section of this manual. Unavailable: High Cabin Temperature (if so equipped) This message appears when the camera detects an interior temperature of more than 104°F (40°C).
Speed Limit Sign indicator
Check soon · usual colour
The manual says: This message may appear when the Traffic Sign Recognition system is engaged. For additional information, refer to “Traffic Sign Recognition (TSR)” in the “Starting and.
Vehicle ahead detection indicator
Check soon · usual colour
The manual says: This indicator shows when the Automatic Emergency Braking (AEB) with Pedestrian Detection system is engaged and has detected a vehicle. For additional information, refer to “Automatic Emergency Braking (AEB) with Pedestrian Detection ” in the “Starting and.
Automatic Emergency Braking (AEB) emergency warning indicator
Check soon · usual colour
The manual says: This indicator illuminates along, with an audible warning, when the system detects the possibility of a forward collision.
What to do: Clean the windshield and front grille sensor. If it stays on in clear weather, have it checked.
| Light | Colour | Meaning | |
|---|---|---|---|
| Supplemental air bag warning light | Amber* | When the ignition switch is placed in the ON or START position, the supplemental air bag warning light illuminates for about 7 seconds and then turns off. This means the system is operational. If any of the following conditions occur, the front air bag, side air bag, curtain air bag, and pretensioner seat belt systems need servicing: ∙The supplemental air bag warning light remains on after approximately 7 seconds. | |
| Front passenger air bag status light | Amber* | The front passenger air bag status light will be lit and the passenger front air bag will be off depending on how the front passenger seat is being used. | |
| Malfunction Indicator Light (MIL) | Amber* | If this indicator light comes on steady or blinks while the engine is running, it may indicate a potential emission control malfunction. The MIL may also come on steady if the fuel-filler cap is loose or missing, or if the vehicle runs out of fuel. 4 liters) of fuel in the fuel tank. After a few driving trips, the light should turn off if no other potential emission control system malfunction exists. | |
| Security indicator light | Amber* | This light blinks when the ignition switch is placed in the OFF, LOCK or ACC (if so equipped) position. The blinking security indicator light indicates that the security systems equipped on the vehicle are operational. For additional information,refer to “Security. | |
| Brightness indicator | Amber* | This indicator shows the brightness adjustment of the instrument panel. For additional information, refer to “Instrument brightness control” in this section. Transmission Shift Position indicator This indicator shows the transmission shift position. Outside Temperature Display The outside temperature display appears in the center region of the vehicle information display. | |
| Warning indicator | Amber* | This indicator illuminates to indicate the status of the Rear Automatic Braking (RAB) system. For additional information, refer to “Rear Automatic Braking (RAB)” in the “Starting and driving” section of this manual. Unavailable: High Cabin Temperature (if so equipped) This message appears when the camera detects an interior temperature of more than 104°F (40°C). | |
| Speed Limit Sign indicator | Amber* | This message may appear when the Traffic Sign Recognition system is engaged. For additional information, refer to “Traffic Sign Recognition (TSR)” in the “Starting and. | |
| Vehicle ahead detection indicator | Amber* | This indicator shows when the Automatic Emergency Braking (AEB) with Pedestrian Detection system is engaged and has detected a vehicle. For additional information, refer to “Automatic Emergency Braking (AEB) with Pedestrian Detection ” in the “Starting and. | |
| Automatic Emergency Braking (AEB) emergency warning indicator | Amber* | This indicator illuminates along, with an audible warning, when the system detects the possibility of a forward collision. | |
| Front fog light indicator light (green) | Green | The front fog light indicator light illuminates when the front fog lights are on. For additional information, refer to “Fog light. | |
| High Beam Assist indicator light (green) | Green | This indicator light illuminates when the headlights come on while the headlight switch is in the AUTO position with the high beams selected. This indicates that the high beam assist is operational. For additional information, refer to “Headlight and turn signal switch” in this section. | |
| Side light and headlight indicator light (green) | Green | The side light and headlight indicator light illuminates when the side light or headlights are on (not including the Daytime Running Lights system or signature lights). If the headlight switch is in the AUTO position, the side light and headlight indicator light will illuminate when the headlights turn on. For additional information, refer to “Headlight and turn signal switch” in this. | |
| Slip indicator light | Green | This indicator light will blink when the Vehicle Dynamic Control (VDC) system is operating, thus alerting the driver to the fact that the road surface is slippery and the vehicle is nearing its traction limits. You may feel or hear the system working; this is normal. The light will blink for a few seconds after the VDC system stops limiting wheel spin. | |
| Vehicle Dynamic Control (VDC) OFF indicator light | Green | This indicator light comes on when the VDC OFF switch is pushed to off. This indicates the VDC system has been turned off. Push the VDC OFF switch again or restart the engine and the system will operate normally. For additional information, refer to “Vehicle Dynamic Control (VDC) system” in the “Starting and driving” section of this manual. | |
| High beam indicator light (blue) | Blue | This blue light comes on when the headlight high beams are on and goes out when. |
Source: 2020 Nissan Maxima Owner's Manual. * Usual colour; the manual text doesn't state it.
2018 to 2019 Maxima warning lights
Anti-lock Braking System (ABS) warning light
Check soon · usual colour
The manual says: When the ignition switch is placed in the ON position, the ABS warning light illuminates and then turns off. This indicates the ABS is operational. If the ABS warning light illuminates while the engine is running or while driving, it may indicate the ABS is not functioning properly. If an ABS malfunction occurs, the anti-lock function is turned off.
What to do: Have the system checked. It is recommended that you visit a NISSAN dealer for this service.
Automatic Emergency Braking (AEB) system warning light
Check soon · usual colour
The manual says: This light comes on when the ignition switch is placed in the ON position. It turns off after the engine is started. This light illuminates when the AEB system is set to OFF on the meter display. If the light illuminates when the AEB system is on, it may indicate that the system is unavailable.
What to do: Clean the windshield and front grille sensor. If it stays on in clear weather, have it checked.
Automatic Emergency Braking (AEB) with Pedestrian Detection system warning light
Check soon · usual colour
The manual says: This light comes on when the ignition switch is placed in the ON position. It turns off after the engine is started.
What to do: Clean the windshield and front grille sensor. If it stays on in clear weather, have it checked.
Brake warning light
Stop safely · usual colour
The manual says: This light functions for both the parking.
What to do: Check the parking brake is fully released. If the light stays on, the brakes may not work properly: stop and get help rather than driving on.
Parking brake indicator
Stop safely · usual colour
The manual says: When the ignition switch is placed in the ON position, this light comes on when the.
What to do: Release the parking brake before driving. If it flashes or will not release, see a dealer.
Low brake fluid warning light
Stop safely · usual colour
The manual says: When the ignition switch is placed in the ON position, the light warns of a low brake fluid level. If the light comes on while the engine is running with the parking brake not applied, stop the vehicle and perform the following: 1. For additional information, refer to “Brake fluid” in the “Doit-yourself” section of this manual. 2. If the brake fluid level is correct, have the warning system checked.
What to do: Check the brake fluid level. Add brake fluid as necessary. It is recommended that you visit a NISSAN dealer for this service.
Charge warning light
Stop safely · usual colour
The manual says: If this light comes on while the engine is running, it may indicate the charging system is not functioning properly. If the belt is loose, broken, or missing, or if the light remains on, have the system checked. CAUTION Do not continue driving if the generator belt is loose, broken or missing. 2-10 Instruments and controls.
What to do: Turn the engine off and check the generator belt. It is recommended that you visit a NISSAN dealer for this service.
More about the battery / charging system light · Shop jump starters on Amazon
Engine oil pressure warning light
Stop safely · usual colour
The manual says: This light warns of low engine oil pressure.If the light flickers or comes on during normal driving, pull off the road in a safe area, stop the engine immediately and call a NISSAN dealer or other authorized repair shop. The engine oil pressure warning light is not designed to indicate a low oil level. Use the dipstick to check the oil level.
What to do: Add Air” warning also appears in the vehicle information display. Add Air” warning appears each time the ignition switch is placed in the ON position as long as the low tire pressure warning light remains illuminated. Have the system checked. It is recommended that you visit a NISSAN dealer for this service.
More about the oil pressure warning light · Shop engine oils on Amazon
Master warning light
Stop safely
The manual says: The master warning light illuminates whenever there is an active warning that can be reviewed in the “warnings review” content page in the meter, or if there is a red-level warning being displayed (which cannot be dismissed). The master warning light will illuminate red if a red-level warning is being displayed, or yellow otherwise.
What to do: Have the power steering system checked. It is recommended that you visit a NISSAN dealer for this service. Have the power steering checked. It is recommended that you visit a NISSAN dealer for this service.
Rear Automatic Braking (RAB) warning light
Stop safely
The manual says: This light comes on when the ignition switch is placed in the ON position. It turns off after the engine is started.
What to do: Clean the windshield and front grille sensor. If it stays on in clear weather, have it checked.
Supplemental air bag warning light
Check soon · usual colour
The manual says: When the ignition switch is placed in the ON or START position, the supplemental air bag warning light illuminates for about 7 seconds and then turns off. This means the system is operational. If any of the following conditions occur, the front air bag, side air bag, curtain air bag, and pretensioner seat belt systems need servicing: ∙The supplemental air bag warning light remains on after approximately 7 seconds.
What to do: It is recommended that you visit a NISSAN dealer for these services.
Front fog light indicator light (green)
Information
The manual says: The front fog light indicator light illuminates when the front fog lights are on. For additional information, refer to “Fog light switch” in this section. 2-14 Instruments and controls.
What to do: Turn them off when visibility is good, as they can dazzle other drivers.
Front passenger air bag status light
Check soon · usual colour
The manual says: The front passenger air bag status light will be lit and the passenger front air bag will be off depending on how the front passenger seat is being used. For additional information, refer to “Front passenger air bag and status light” in the “Safety — Seats, seat belts and supplemental restraint system” section of this manual.
What to do: The car drives normally, but get it checked soon. Do not try to repair airbag parts yourself.
High Beam Assist indicator light (green)
Information
The manual says: This indicator light illuminates when the headlights come on while the headlight switch is in the AUTO position with the high beams selected. This indicates that the high beam assist is operational. For additional information, refer to “Headlight and turn signal switch” in this section.
What to do: Dip them for oncoming traffic and when following another car.
High beam indicator light (blue)
Information
The manual says: This blue light comes on when the headlight high beams are on and goes out when.
What to do: Dip them for oncoming traffic and when following another car.
Malfunction Indicator Light (MIL)
Check soon · usual colour
The manual says: If this indicator light comes on steady or blinks while the engine is running, it may indicate a potential emission control malfunction. The MIL may also come on steady if the fuel-filler cap is loose or missing, or if the vehicle runs out of fuel. 4 liters) of fuel in the fuel tank. After a few driving trips, the light should turn off if no other potential emission control system malfunction exists.
What to do: Check to make sure the fuel-filler cap is installed and closed tightly, and that the vehicle has at least 3 gallons (11. Check the fuel-filler cap if the Loose Fuel Cap warning appears in the vehicle information display. It is recommended that you visit a NISSAN dealer for this service.
More about the check engine light · Shop OBD2 scanners on Amazon
Security indicator light
Check soon · usual colour
The manual says: This light blinks when the ignition switch is placed in the OFF, LOCK or ACC (if so equipped) position. The blinking security indicator light indicates that the security systems equipped on the vehicle are operational. For additional information,refer to “Security.
What to do: Hold the key fob against the start button and start again. If it keeps happening, replace the key fob battery.
More about the key / immobilizer light · Shop key fob batterys on Amazon
Side light and headlight indicator light (green)
Information
The manual says: The side light and headlight indicator light illuminates when the side light or headlights are on (not including the Daytime Running Lights system or signature lights). If the headlight switch is in the AUTO position, the side light and headlight indicator light will illuminate when the headlights turn on. For additional information, refer to “Headlight and turn signal switch” in this.
What to do: Nothing to do.
Slip indicator light
Information
The manual says: This indicator light will blink when the Vehicle Dynamic Control (VDC) system is operating, thus alerting the driver to the fact that the road surface is slippery and the vehicle is nearing its traction limits. You may feel or hear the system working; this is normal. The light will blink for a few seconds after the VDC system stops limiting wheel spin.
What to do: It is recommended that you visit a NISSAN dealer for this service. Turn signal/hazard indicator lights The appropriate light flashes when the turn signal switch is activated.
Vehicle Dynamic Control (VDC) OFF indicator light
Information
The manual says: This indicator light comes on when the VDC OFF switch is pushed to off. This indicates the VDC system has been turned off. Push the VDC OFF switch again or restart the engine and the system will operate normally. For additional information, refer to “Vehicle Dynamic Control (VDC) system” in the “Starting and driving” section of this manual.
What to do: Turn it back on unless you are stuck in snow or mud. It normally turns on again with the next start.
| Light | Colour | Meaning | |
|---|---|---|---|
| Brake warning light | Red* | This light functions for both the parking. | |
| Parking brake indicator | Red* | When the ignition switch is placed in the ON position, this light comes on when the. | |
| Low brake fluid warning light | Red* | When the ignition switch is placed in the ON position, the light warns of a low brake fluid level. If the light comes on while the engine is running with the parking brake not applied, stop the vehicle and perform the following: 1. For additional information, refer to “Brake fluid” in the “Doit-yourself” section of this manual. 2. If the brake fluid level is correct, have the warning system checked. | |
| Charge warning light | Red* | If this light comes on while the engine is running, it may indicate the charging system is not functioning properly. If the belt is loose, broken, or missing, or if the light remains on, have the system checked. CAUTION Do not continue driving if the generator belt is loose, broken or missing. 2-10 Instruments and controls. | |
| Engine oil pressure warning light | Red* | This light warns of low engine oil pressure.If the light flickers or comes on during normal driving, pull off the road in a safe area, stop the engine immediately and call a NISSAN dealer or other authorized repair shop. The engine oil pressure warning light is not designed to indicate a low oil level. Use the dipstick to check the oil level. | |
| Master warning light | Red | The master warning light illuminates whenever there is an active warning that can be reviewed in the “warnings review” content page in the meter, or if there is a red-level warning being displayed (which cannot be dismissed). The master warning light will illuminate red if a red-level warning is being displayed, or yellow otherwise. | |
| Rear Automatic Braking (RAB) warning light | Red | This light comes on when the ignition switch is placed in the ON position. It turns off after the engine is started. | |
| Anti-lock Braking System (ABS) warning light | Amber* | When the ignition switch is placed in the ON position, the ABS warning light illuminates and then turns off. This indicates the ABS is operational. If the ABS warning light illuminates while the engine is running or while driving, it may indicate the ABS is not functioning properly. If an ABS malfunction occurs, the anti-lock function is turned off. | |
| Automatic Emergency Braking (AEB) system warning light | Amber* | This light comes on when the ignition switch is placed in the ON position. It turns off after the engine is started. This light illuminates when the AEB system is set to OFF on the meter display. If the light illuminates when the AEB system is on, it may indicate that the system is unavailable. | |
| Automatic Emergency Braking (AEB) with Pedestrian Detection system warning light | Amber* | This light comes on when the ignition switch is placed in the ON position. It turns off after the engine is started. | |
| Supplemental air bag warning light | Amber* | When the ignition switch is placed in the ON or START position, the supplemental air bag warning light illuminates for about 7 seconds and then turns off. This means the system is operational. If any of the following conditions occur, the front air bag, side air bag, curtain air bag, and pretensioner seat belt systems need servicing: ∙The supplemental air bag warning light remains on after approximately 7 seconds. | |
| Front passenger air bag status light | Amber* | The front passenger air bag status light will be lit and the passenger front air bag will be off depending on how the front passenger seat is being used. For additional information, refer to “Front passenger air bag and status light” in the “Safety — Seats, seat belts and supplemental restraint system” section of this manual. | |
| Malfunction Indicator Light (MIL) | Amber* | If this indicator light comes on steady or blinks while the engine is running, it may indicate a potential emission control malfunction. The MIL may also come on steady if the fuel-filler cap is loose or missing, or if the vehicle runs out of fuel. 4 liters) of fuel in the fuel tank. After a few driving trips, the light should turn off if no other potential emission control system malfunction exists. | |
| Security indicator light | Amber* | This light blinks when the ignition switch is placed in the OFF, LOCK or ACC (if so equipped) position. The blinking security indicator light indicates that the security systems equipped on the vehicle are operational. For additional information,refer to “Security. | |
| Front fog light indicator light (green) | Green | The front fog light indicator light illuminates when the front fog lights are on. For additional information, refer to “Fog light switch” in this section. 2-14 Instruments and controls. | |
| High Beam Assist indicator light (green) | Green | This indicator light illuminates when the headlights come on while the headlight switch is in the AUTO position with the high beams selected. This indicates that the high beam assist is operational. For additional information, refer to “Headlight and turn signal switch” in this section. | |
| Side light and headlight indicator light (green) | Green | The side light and headlight indicator light illuminates when the side light or headlights are on (not including the Daytime Running Lights system or signature lights). If the headlight switch is in the AUTO position, the side light and headlight indicator light will illuminate when the headlights turn on. For additional information, refer to “Headlight and turn signal switch” in this. | |
| Slip indicator light | Green | This indicator light will blink when the Vehicle Dynamic Control (VDC) system is operating, thus alerting the driver to the fact that the road surface is slippery and the vehicle is nearing its traction limits. You may feel or hear the system working; this is normal. The light will blink for a few seconds after the VDC system stops limiting wheel spin. | |
| Vehicle Dynamic Control (VDC) OFF indicator light | Green | This indicator light comes on when the VDC OFF switch is pushed to off. This indicates the VDC system has been turned off. Push the VDC OFF switch again or restart the engine and the system will operate normally. For additional information, refer to “Vehicle Dynamic Control (VDC) system” in the “Starting and driving” section of this manual. | |
| High beam indicator light (blue) | Blue | This blue light comes on when the headlight high beams are on and goes out when. |
Source: 2018 Nissan Maxima Owner's Manual; 2019 Nissan Maxima Owner's Manual. * Usual colour; the manual text doesn't state it.
2017 Maxima warning lights
Supplemental air bag warning light
Check soon · usual colour
The manual says: When the ignition switch is placed in the ON or START position, the supplemental air bag warning light illuminates for about 7 seconds and then turns off. This means the system is operational. If any of the following conditions occur, the front air bag, side air bag, curtain air bag, and pretensioner seat belt systems need servicing: The supplemental air bag warning light remains on after approximately 7 seconds.
What to do: It is recommended that you visit a NISSAN dealer for these services. It is recommended that you visit a NISSAN dealer for this service.
Front fog light indicator light (green)
Information
The manual says: The front fog light indicator light illuminates when the front fog lights are on. For additional information, refer to “Fog light switch” in this section.
What to do: Turn them off when visibility is good, as they can dazzle other drivers.
Front passenger air bag status light
Check soon · usual colour
The manual says: The front passenger air bag status light will be lit and the passenger front air bag will be off depending on how the front passenger seat is being used. 2-12 Instruments and controls.
What to do: The car drives normally, but get it checked soon. Do not try to repair airbag parts yourself.
High beam indicator light (blue)
Information
The manual says: This blue light comes on when the headlight high beams are on and goes out when the low beams are selected. The high beam indicator light also comes on when the passing signal is activated.
What to do: Dip them for oncoming traffic and when following another car.
Malfunction Indicator Light (MIL)
Check soon · usual colour
The manual says: If this indicator light comes on steady or blinks while the engine is running, it may indicate a potential emission control malfunction. The MIL may also come on steady if the fuel-filler cap is loose or missing, or if the vehicle runs out of fuel. 4 liters) of fuel in the fuel tank. After a few driving trips, the light should turn off if no other potential emission control system malfunction exists.
What to do: Check to make sure the fuel-filler cap is installed and closed tightly, and that the vehicle has at least 3 gallons (11. Check the fuel-filler cap if the Loose Fuel Cap warning appears in the vehicle information display. It is recommended that you visit a NISSAN dealer for this service. Have the vehicle inspected. It is recommended that you visit a NISSAN dealer for this service.
More about the check engine light · Shop OBD2 scanners on Amazon
Security indicator light
Check soon · usual colour
The manual says: This light blinks when the ignition switch is placed in the OFF, LOCK or ACC (if so equipped) position. The blinking security indicator light indicates that the security systems equipped on the vehicle are operational. Instruments and controls 2-13.
What to do: Hold the key fob against the start button and start again. If it keeps happening, replace the key fob battery.
More about the key / immobilizer light · Shop key fob batterys on Amazon
Side light and headlight indicator light (green)
Information
The manual says: The side light and headlight indicator light illuminates when the side light or headlights are on (not including daytime running or signature lights). If the headlight switch is in the AUTO position, the side light and headlight indicator light will illuminate when the headlights turn on. For additional information, refer to “Headlight and turn signal switch” in this section.
What to do: Nothing to do.
Slip indicator light
Information
The manual says: This indicator will blink when the VDC system is operating, thus alerting the driver to the fact that the road surface is slippery and the vehicle is nearing its traction limits. You may feel or hear the system working; this is normal. The light will blink for a few seconds after the VDC system stops limiting wheel spin. The indicator light also comes on when you place the ignition switch in the ON position.
What to do: It is recommended that you visit a NISSAN dealer for this service. Turn signal/hazard indicator lights The appropriate light flashes when the turn signal switch is activated.
Vehicle Dynamic Control (VDC) OFF indicator light
Information
The manual says: This indicator light comes on when the VDC OFF switch is pushed to off. This indicates the VDC system has been turned off. Push the VDC OFF switch again or restart the engine and the system will operate normally. For additional information, refer to “Vehicle Dynamic Control (VDC) system” in the “Starting and driving” section of this manual.
What to do: It is recommended that you visit a NISSAN dealer for this service.
Illumination indicator
Check soon · usual colour
The manual says: This indicator shows the illumination adjustment of the instrument panel. For additional information, refer to “Instrument brightness control” in this section. Transmission Shift Position indicator This indicator shows the transmission shift position. Outside Temperature Display The outside temperature display appears in the center region of the vehicle information display.
| Light | Colour | Meaning | |
|---|---|---|---|
| Supplemental air bag warning light | Amber* | When the ignition switch is placed in the ON or START position, the supplemental air bag warning light illuminates for about 7 seconds and then turns off. This means the system is operational. If any of the following conditions occur, the front air bag, side air bag, curtain air bag, and pretensioner seat belt systems need servicing: The supplemental air bag warning light remains on after approximately 7 seconds. | |
| Front passenger air bag status light | Amber* | The front passenger air bag status light will be lit and the passenger front air bag will be off depending on how the front passenger seat is being used. 2-12 Instruments and controls. | |
| Malfunction Indicator Light (MIL) | Amber* | If this indicator light comes on steady or blinks while the engine is running, it may indicate a potential emission control malfunction. The MIL may also come on steady if the fuel-filler cap is loose or missing, or if the vehicle runs out of fuel. 4 liters) of fuel in the fuel tank. After a few driving trips, the light should turn off if no other potential emission control system malfunction exists. | |
| Security indicator light | Amber* | This light blinks when the ignition switch is placed in the OFF, LOCK or ACC (if so equipped) position. The blinking security indicator light indicates that the security systems equipped on the vehicle are operational. Instruments and controls 2-13. | |
| Illumination indicator | Amber* | This indicator shows the illumination adjustment of the instrument panel. For additional information, refer to “Instrument brightness control” in this section. Transmission Shift Position indicator This indicator shows the transmission shift position. Outside Temperature Display The outside temperature display appears in the center region of the vehicle information display. | |
| Front fog light indicator light (green) | Green | The front fog light indicator light illuminates when the front fog lights are on. For additional information, refer to “Fog light switch” in this section. | |
| Side light and headlight indicator light (green) | Green | The side light and headlight indicator light illuminates when the side light or headlights are on (not including daytime running or signature lights). If the headlight switch is in the AUTO position, the side light and headlight indicator light will illuminate when the headlights turn on. For additional information, refer to “Headlight and turn signal switch” in this section. | |
| Slip indicator light | Green | This indicator will blink when the VDC system is operating, thus alerting the driver to the fact that the road surface is slippery and the vehicle is nearing its traction limits. You may feel or hear the system working; this is normal. The light will blink for a few seconds after the VDC system stops limiting wheel spin. The indicator light also comes on when you place the ignition switch in the ON position. | |
| Vehicle Dynamic Control (VDC) OFF indicator light | Green | This indicator light comes on when the VDC OFF switch is pushed to off. This indicates the VDC system has been turned off. Push the VDC OFF switch again or restart the engine and the system will operate normally. For additional information, refer to “Vehicle Dynamic Control (VDC) system” in the “Starting and driving” section of this manual. | |
| High beam indicator light (blue) | Blue | This blue light comes on when the headlight high beams are on and goes out when the low beams are selected. The high beam indicator light also comes on when the passing signal is activated. |
Source: 2017 Nissan Maxima Owner's Manual. * Usual colour; the manual text doesn't state it.
2016 Maxima warning lights
Anti-lock Braking System (ABS) warning light
Check soon · usual colour
The manual says: When the ignition switch is placed in the ON position, the ABS warning light illuminates and then turns off. This indicates the ABS is operational. WARNING LIGHTS, INDICATOR LIGHTS AND AUDIBLE REMINDERS Instruments and controls 2-7.
What to do: Drive carefully, leave extra stopping distance and have it checked soon. If the red brake light is also on, stop driving.
Brake warning light
Stop safely · usual colour
The manual says: This light functions for both the parking brake and.
What to do: Check the parking brake is fully released. If the light stays on, the brakes may not work properly: stop and get help rather than driving on.
Low brake fluid warning light
Stop safely · usual colour
The manual says: When the ignition switch is placed in the ON position, the light warns of a low brake fluid level. If the light comes on while the engine is running with the parking brake not applied, stop the vehicle and perform the following: 1. For additional information, refer to “Brake fluid” in the “Maintenance and do-it-yourself” section of this manual. 2.
What to do: Check the brake fluid level. Add brake fluid as necessary.
Charge warning light
Stop safely · usual colour
The manual says: If this light comes on while the engine is running, it may indicate the charging system is not functioning properly. If the belt is loose, broken, missing, or if the light remains on, see a NISSAN dealer immediately. CAUTION; Do not continue driving if the generator.
What to do: Turn the engine off and check the generator belt.
More about the battery / charging system light · Shop jump starters on Amazon
Engine oil pressure warning light
Stop safely · usual colour
The manual says: This light warns of low engine oil pressure. If the light flickers or comes on during normal driving, pull off the road in a safe area, stop the engine immediately and call a NISSAN dealer or other authorized repair shop. The engine oil pressure warning light is not designed to indicate a low oil level. Use the dipstick to check the oil level.
What to do: Pull over safely and turn the engine off. Check the oil level when the engine has cooled. If the level is fine and the light stays on, have it towed.
More about the oil pressure warning light · Shop engine oils on Amazon
Forward Emergency Braking (FEB) system warning light
Check soon · usual colour
The manual says: This light illuminates when the Forward Emergency Braking system is set to OFF on the meter display. If the light illuminates when the Forward Emergency Braking system is ON, it may indicate that the system is unavailable. For additional information, refer to “Forward Emergency Braking system” in the “Starting and driving” section of this manual.
What to do: Add Air” warning also appears in the vehicle information display. Add Air” warning appears each time the ignition switch is placed in the ON position as long as the low tire pressure warning light remains illuminated. Have the system checked by a NISSAN dealer.
Master warning light
Stop safely
The manual says: The master warning light illuminates whenever there is an active warning that can be reviewed in the “warnings review” content page in the meter, or if there is a red-level warning being displayed (which cannot be dismissed). The master warning light will illuminate red if a red-level warning is being displayed, or yellow otherwise.; Push Engine Start Lock Warning; Key Fob Removed from Vehicle Warning.
What to do: Read the message on the multi-information display. Red means stop safely; amber means get it checked.
Supplemental air bag warning light
Check soon · usual colour
The manual says: When the ignition switch is placed in the ON or START position, the supplemental air bag warning light illuminates for about 7 seconds and then turns off. This means the system is operational.
What to do: The car drives normally, but get it checked soon. Do not try to repair airbag parts yourself.
Front fog light indicator light
Information · usual colour
The manual says: The front fog light indicator light illuminates when the front fog lights are ON. For additional information, refer to “Fog light switch” in this section.
What to do: Turn them off when visibility is good, as they can dazzle other drivers.
Front passenger air bag status light
Check soon · usual colour
The manual says: The front passenger air bag status light will be lit and the passenger front air bag will be OFF depending on how the front passenger seat is being used. For additional information, refer to “Front passenger air bag and status light” in the “Safety — Seats, seat belts and supplemental restraint sys.
What to do: The car drives normally, but get it checked soon. Do not try to repair airbag parts yourself.
High beam indicator light (blue)
Information
The manual says: This blue light comes on when the headlight high beams are on and goes out when the low beams are selected. The high beam indicator light also comes on when the passing signal is activated.
What to do: Dip them for oncoming traffic and when following another car.
Malfunction Indicator Light (MIL)
Check soon · usual colour
The manual says: If this indicator light comes on steady or blinks while the engine is running, it may indicate a potential emission control malfunction. The MIL may also come on steady if the fuel-filler cap is loose or missing, or if the vehicle runs out of fuel. 4 liters) of fuel in the fuel tank. After a few driving trips, the light should turn off if no other potential emission control system malfunction exists.
What to do: Check to make sure the fuel-filler cap is installed and closed tightly, and that the vehicle has at least 3 gallons (11.
More about the check engine light · Shop OBD2 scanners on Amazon
Security indicator light
Check soon · usual colour
The manual says: This light blinks when the ignition switch is placed in the OFF, LOCK or ACC (if so equipped) position. The blinking security indicator light indicates that the security systems equipped on the vehicle are operational. For additional information, refer to “Security sys.
What to do: Hold the key fob against the start button and start again. If it keeps happening, replace the key fob battery.
More about the key / immobilizer light · Shop key fob batterys on Amazon
Side light and headlight indicator light (green)
Information
The manual says: The side light and headlight indicator light illuminates when the side light or headlights are ON (not including daytime running or signature lights). If the headlight switch is in the AUTO position (if so equipped), the side light and headlight indicator light will illuminate when the headlights turn on. For additional information, refer to “Headlight and turn signal switch” in this section.
What to do: Nothing to do.
Slip indicator light
Information
The manual says: This indicator will blink when the VDC system is operating, thus alerting the driver to the fact that the road surface is slippery and the vehicle is nearing its traction limits. You may feel or hear the system working; this is normal. The light will blink for a few seconds after the VDC system stops limiting wheel spin. The indicator light also comes on when you place the ignition switch in the ON position.
What to do: Turn signal/hazard indicator lights The appropriate light flashes when the turn signal switch is activated.
Vehicle Dynamic Control (VDC) OFF indicator light
Check soon · usual colour
The manual says: This indicator light comes on when the VDC off switch is pushed to OFF. This indicates the VDC system is not operating. Push the VDC off switch again or restart the engine and the system will operate normally. For additional information, refer to “Vehicle Dynamic Control (VDC) system” in the “Starting and driving” section of this manual.
What to do: Turn it back on unless you are stuck in snow or mud. It normally turns on again with the next start.
Turn Indicator
Check soon · usual colour
The manual says: The 3 flash pass can be set to be ON or OFF. From the Turn Indicator menu, select “3 Flash On”. Use the OK button to turn this feature ON or OFF. Locking Select the “Locking” menu option to turn on/off the following locking indicators: Ext. Door Switch — When this item is turned on, the request switches are activated for door locking and unlocking. From the Vehicle Settings menu, select “Ext. Door Switch”.
| Light | Colour | Meaning | |
|---|---|---|---|
| Brake warning light | Red* | This light functions for both the parking brake and. | |
| Low brake fluid warning light | Red* | When the ignition switch is placed in the ON position, the light warns of a low brake fluid level. If the light comes on while the engine is running with the parking brake not applied, stop the vehicle and perform the following: 1. For additional information, refer to “Brake fluid” in the “Maintenance and do-it-yourself” section of this manual. 2. | |
| Charge warning light | Red* | If this light comes on while the engine is running, it may indicate the charging system is not functioning properly. If the belt is loose, broken, missing, or if the light remains on, see a NISSAN dealer immediately. CAUTION; Do not continue driving if the generator. | |
| Engine oil pressure warning light | Red* | This light warns of low engine oil pressure. If the light flickers or comes on during normal driving, pull off the road in a safe area, stop the engine immediately and call a NISSAN dealer or other authorized repair shop. The engine oil pressure warning light is not designed to indicate a low oil level. Use the dipstick to check the oil level. | |
| Master warning light | Red | The master warning light illuminates whenever there is an active warning that can be reviewed in the “warnings review” content page in the meter, or if there is a red-level warning being displayed (which cannot be dismissed). The master warning light will illuminate red if a red-level warning is being displayed, or yellow otherwise.; Push Engine Start Lock Warning; Key Fob Removed from Vehicle Warning. | |
| Anti-lock Braking System (ABS) warning light | Amber* | When the ignition switch is placed in the ON position, the ABS warning light illuminates and then turns off. This indicates the ABS is operational. WARNING LIGHTS, INDICATOR LIGHTS AND AUDIBLE REMINDERS Instruments and controls 2-7. | |
| Forward Emergency Braking (FEB) system warning light | Amber* | This light illuminates when the Forward Emergency Braking system is set to OFF on the meter display. If the light illuminates when the Forward Emergency Braking system is ON, it may indicate that the system is unavailable. For additional information, refer to “Forward Emergency Braking system” in the “Starting and driving” section of this manual. | |
| Supplemental air bag warning light | Amber* | When the ignition switch is placed in the ON or START position, the supplemental air bag warning light illuminates for about 7 seconds and then turns off. This means the system is operational. | |
| Front passenger air bag status light | Amber* | The front passenger air bag status light will be lit and the passenger front air bag will be OFF depending on how the front passenger seat is being used. For additional information, refer to “Front passenger air bag and status light” in the “Safety — Seats, seat belts and supplemental restraint sys. | |
| Malfunction Indicator Light (MIL) | Amber* | If this indicator light comes on steady or blinks while the engine is running, it may indicate a potential emission control malfunction. The MIL may also come on steady if the fuel-filler cap is loose or missing, or if the vehicle runs out of fuel. 4 liters) of fuel in the fuel tank. After a few driving trips, the light should turn off if no other potential emission control system malfunction exists. | |
| Security indicator light | Amber* | This light blinks when the ignition switch is placed in the OFF, LOCK or ACC (if so equipped) position. The blinking security indicator light indicates that the security systems equipped on the vehicle are operational. For additional information, refer to “Security sys. | |
| Vehicle Dynamic Control (VDC) OFF indicator light | Amber* | This indicator light comes on when the VDC off switch is pushed to OFF. This indicates the VDC system is not operating. Push the VDC off switch again or restart the engine and the system will operate normally. For additional information, refer to “Vehicle Dynamic Control (VDC) system” in the “Starting and driving” section of this manual. | |
| Turn Indicator | Amber* | The 3 flash pass can be set to be ON or OFF. From the Turn Indicator menu, select “3 Flash On”. Use the OK button to turn this feature ON or OFF. Locking Select the “Locking” menu option to turn on/off the following locking indicators: Ext. Door Switch — When this item is turned on, the request switches are activated for door locking and unlocking. From the Vehicle Settings menu, select “Ext. Door Switch”. | |
| Front fog light indicator light | Green* | The front fog light indicator light illuminates when the front fog lights are ON. For additional information, refer to “Fog light switch” in this section. | |
| Side light and headlight indicator light (green) | Green | The side light and headlight indicator light illuminates when the side light or headlights are ON (not including daytime running or signature lights). If the headlight switch is in the AUTO position (if so equipped), the side light and headlight indicator light will illuminate when the headlights turn on. For additional information, refer to “Headlight and turn signal switch” in this section. | |
| Slip indicator light | Green | This indicator will blink when the VDC system is operating, thus alerting the driver to the fact that the road surface is slippery and the vehicle is nearing its traction limits. You may feel or hear the system working; this is normal. The light will blink for a few seconds after the VDC system stops limiting wheel spin. The indicator light also comes on when you place the ignition switch in the ON position. | |
| High beam indicator light (blue) | Blue | This blue light comes on when the headlight high beams are on and goes out when the low beams are selected. The high beam indicator light also comes on when the passing signal is activated. |
Source: 2016 Nissan Maxima Owner's Manual. * Usual colour; the manual text doesn't state it.
2010 to 2014 Maxima warning lights
Master warning light
Check soon · usual colour
The manual says: When the ignition is in the ON position, the master warning light illuminates if any of the following are displayed on the vehicle information display.; No key warning; Low fuel warning; Low windshield-washer fluid warning; Parking brake release warning; Door/trunk open warning.
What to do: Read the message on the multi-information display. Red means stop safely; amber means get it checked.
Supplemental air bag warning light
Check soon · usual colour
The manual says: When the ignition switch is placed in the ON or START position, the supplemental air bag warning light illuminates for about 7 seconds and then turns off if the SRS air bag systems are operational. This means the system is operational.
What to do: The car drives normally, but get it checked soon. Do not try to repair airbag parts yourself.
Continuously Variable Transmission (CVT) indicator light
Check soon · usual colour
The manual says: When the ignition switch is placed in the ON position, the light comes on for 2 seconds. 2-14 Instruments and controls.
What to do: Pull over and let it cool with the engine idling. If the light stays on, have it checked before driving far.
Continuously Variable Transmission (CVT) position indicator light
Check soon · usual colour
The manual says: When the ignition switch is placed in the ON position, the indicator light shows the shift lever position. in the “Starting and driving” section of this manual.
What to do: Pull over and let it cool with the engine idling. If the light stays on, have it checked before driving far.
Cruise main switch indicator light
Information · usual colour
The manual says: The light comes on when the cruise control main switch is pushed. The light goes out when the main switch is pushed again. When the cruise main switch indicator light comes on, the cruise control system is operational. Front fog light indicator light (if so equipped) The front fog light indicator light illuminates when the front fog lights are ON.
What to do: Nothing to do.
Front passenger air bag status light
Check soon · usual colour
The manual says: The front passenger air bag status light will be lit and the passenger front air bag will be OFF depending on how the front passenger seat is being used. For front passenger air bag status light operation, see “Front passenger air bag and status light” in the “Safety — Seats, seat belts and supplemental restraint system” section of this manual.
What to do: The car drives normally, but get it checked soon. Do not try to repair airbag parts yourself.
High beam indicator light (blue)
Information
The manual says: This blue light comes on when the headlight high beams are on and goes out when the low beams are selected. The high beam indicator light also comes on when the passing signal is activated.
What to do: Dip them for oncoming traffic and when following another car.
Malfunction indicator light (MIL)
Check soon · usual colour
The manual says: If the malfunction indicator light comes on steady or blinks while the engine is running, it may indicate a potential emission control and/or CVT malfunction. The malfunction indicator light may also come on steady if the fuel-filler cap is loose or missing, or if the vehicle runs out of fuel. 4 liters) of fuel in the fuel tank.
What to do: Check to make sure the fuel-filler cap is installed and closed tightly, and that the vehicle has at least 3 gallons (11. Check the fuelfiller cap if the LOOSE FUEL CAP warning appears in the vehicle information display.
More about the check engine light · Shop OBD2 scanners on Amazon
Security indicator light
Check soon · usual colour
The manual says: This light blinks when the ignition switch is placed in the OFF, LOCK or ACC position. The blinking security indicator light indicates that the security systems equipped on the vehicle are operational. For additional information, see “Security sys.
What to do: Hold the key fob against the start button and start again. If it keeps happening, replace the key fob battery.
More about the key / immobilizer light · Shop key fob batterys on Amazon
Side light and headlight indicator light (green)
Information
The manual says: The side light and headlight indicator light illuminates when the side light or headlight position is selected. later in this section for further details.
What to do: Nothing to do.
Slip indicator light
Information
The manual says: This indicator will blink when the VDC system or the traction control system is operating, thus alerting that the vehicle is nearing its traction limits. The road surface may be slippery. Both lights flash when the hazard switch is turned.
What to do: Turn signal/hazard indicator lights The appropriate light flashes when the turn signal switch is activated.
Vehicle Dynamic Control (VDC) OFF indicator light
Information
The manual says: This indicator light comes on when the Vehicle Dynamic Control off switch is pushed to OFF. This indicates the Vehicle Dynamic Control has been turned off. Push the Vehicle Dynamic Control off switch again or restart the engine and the system will be reactivated. The Vehicle Dynamic Control light also comes on when you push the push-button ignition switch to the ON position.
What to do: Turn it back on unless you are stuck in snow or mud. It normally turns on again with the next start.
| Light | Colour | Meaning | |
|---|---|---|---|
| Master warning light | Amber* | When the ignition is in the ON position, the master warning light illuminates if any of the following are displayed on the vehicle information display.; No key warning; Low fuel warning; Low windshield-washer fluid warning; Parking brake release warning; Door/trunk open warning. | |
| Supplemental air bag warning light | Amber* | When the ignition switch is placed in the ON or START position, the supplemental air bag warning light illuminates for about 7 seconds and then turns off if the SRS air bag systems are operational. This means the system is operational. | |
| Continuously Variable Transmission (CVT) indicator light | Amber* | When the ignition switch is placed in the ON position, the light comes on for 2 seconds. 2-14 Instruments and controls. | |
| Continuously Variable Transmission (CVT) position indicator light | Amber* | When the ignition switch is placed in the ON position, the indicator light shows the shift lever position. in the “Starting and driving” section of this manual. | |
| Front passenger air bag status light | Amber* | The front passenger air bag status light will be lit and the passenger front air bag will be OFF depending on how the front passenger seat is being used. For front passenger air bag status light operation, see “Front passenger air bag and status light” in the “Safety — Seats, seat belts and supplemental restraint system” section of this manual. | |
| Malfunction indicator light (MIL) | Amber* | If the malfunction indicator light comes on steady or blinks while the engine is running, it may indicate a potential emission control and/or CVT malfunction. The malfunction indicator light may also come on steady if the fuel-filler cap is loose or missing, or if the vehicle runs out of fuel. 4 liters) of fuel in the fuel tank. | |
| Security indicator light | Amber* | This light blinks when the ignition switch is placed in the OFF, LOCK or ACC position. The blinking security indicator light indicates that the security systems equipped on the vehicle are operational. For additional information, see “Security sys. | |
| Cruise main switch indicator light | Green* | The light comes on when the cruise control main switch is pushed. The light goes out when the main switch is pushed again. When the cruise main switch indicator light comes on, the cruise control system is operational. Front fog light indicator light (if so equipped) The front fog light indicator light illuminates when the front fog lights are ON. | |
| Side light and headlight indicator light (green) | Green | The side light and headlight indicator light illuminates when the side light or headlight position is selected. later in this section for further details. | |
| Slip indicator light | Green | This indicator will blink when the VDC system or the traction control system is operating, thus alerting that the vehicle is nearing its traction limits. The road surface may be slippery. Both lights flash when the hazard switch is turned. | |
| Vehicle Dynamic Control (VDC) OFF indicator light | Green | This indicator light comes on when the Vehicle Dynamic Control off switch is pushed to OFF. This indicates the Vehicle Dynamic Control has been turned off. Push the Vehicle Dynamic Control off switch again or restart the engine and the system will be reactivated. The Vehicle Dynamic Control light also comes on when you push the push-button ignition switch to the ON position. | |
| High beam indicator light (blue) | Blue | This blue light comes on when the headlight high beams are on and goes out when the low beams are selected. The high beam indicator light also comes on when the passing signal is activated. |
Source: 2010 Nissan Maxima Owner's Manual; 2011 Nissan Maxima Owner's Manual; 2012 Nissan Maxima Owner's Manual and others. * Usual colour; the manual text doesn't state it.
More for the Maxima
Nissan Maxima key fob battery size · All Nissan dashboard symbols