Nissan Murano dashboard symbols and warning lights
Every light in the Nissan Murano owner's manual, 2010 to 2026. Tap a light to see what it means and what to do. Red means stop safely, amber means get it checked soon.
2025 to 2026 Murano warning lights
Low brake fluid warning light
Stop safely · usual colour
The manual says: When the ignition switch is placed in the ON position, the light warns of a low brake fluid level. If the light comes on while the engine is running with the parking brake not applied, stop the vehicle and perform the following: 1. For additional information, see “Brake fluid” 2. If the brake fluid level is correct, have the warning system checked. WARNING.
What to do: Check the brake fluid level. Add brake fluid as necessary. It is recommended that you visit a NISSAN dealer for this service.
Charge warning light
Stop safely
The manual says: If this light comes on while the engine is running, it may indicate the charging system is not functioning properly. If the belt is loose, broken, missing, or if the light remains on, have your vehicle serviced immediately. CAUTION Do not continue driving if the drive belt is loose, broken or missing. Electric power steering warning light (red) WARNING.
What to do: Turn the engine off and check the drive belt. It is recommended that you visit a NISSAN dealer for this service. Have the power steering system checked. It is recommended that you visit a NISSAN dealer for this service. Stop the vehicle in a safe place immediately. Have the power steering checked. It is recommended that you visit a NISSAN dealer for this service.
More about the battery / charging system light · Shop jump starters on Amazon
Electric shift control system warning light
Check soon · usual colour
The manual says: This light illuminates when a malfunction occurs in the electric shift control system. When the master warning light illuminates, the chime sounds and the following message is displayed in the vehicle information display: “When parked apply parking brake”. When the ignition is placed in the OFF position, the chime sounds continuously. Ensure the parking brake is applied Have the system checked.
What to do: It is recommended that you visit a NISSAN dealer for this service.
Engine oil pressure warning light
Stop safely · usual colour
The manual says: This light warns of low engine oil pressure. If the light flickers or comes on during normal driving, pull off the road in a safe area, stop the engine immediately and call a NISSAN dealer or other authorized repair shop. The engine oil pressure warning light is not designed to indicate a low oil level. Use the dipstick to check the oil level.
What to do: Pull over safely and turn the engine off. Check the oil level when the engine has cooled. If the level is fine and the light stays on, have it towed.
More about the oil pressure warning light · Shop engine oils on Amazon
Master warning light
Check soon · usual colour
The manual says: When the ignition is in the ON position, the master warning light illuminates if a warning message appears in the vehicle information display. For additional information, see “Vehicle information display” Seat belt warning light and chime; The light and chime remind you to fasten the seat belts.
What to do: Read the message on the multi-information display. Red means stop safely; amber means get it checked.
Steering Assist Hands Off warning light
Check soon · usual colour
The manual says: When the Steering Assist is activated, it monitors the driver’s steering wheel operation. If the steering wheel is not operated or the driver takes his/her hands off the steering wheel for a period of time, the warning light illuminates.
What to do: Drive carefully and have it checked. If it came on after a lot of parking manoeuvres, it can reset after the car cools down.
Supplemental air bag warning light
Check soon
The manual says: When the ignition switch is placed in the ON position, the supplemental air bag warning light illuminates for about 7 seconds and then turns off. This means the system is operational. If any of the following conditions occur, the front air bag, side air bag, curtain air bag, and pretensioner seat belt systems need servicing: The supplemental air bag warning light remains on after approximately 7 seconds.
What to do: It is recommended that you visit a NISSAN dealer for these services. It is recommended that you visit a NISSAN dealer for this service. Have the system checked. It is recommended that you visit a NISSAN dealer for this service.
Automatic Emergency Braking (AEB) with Pedestrian Detection system warning light
Check soon
The manual says: This light comes on when the ignition switch is placed in the ON position. It turns off after the engine is started. This light illuminates when the AEB with Pedestrian Detection system is set to OFF in the meter or when the Vehicle Dynamic Control (VDC) system is turned off. If the light illuminates when the AEB with Pedestrian Detection system is on, it may indicate that the system is unavailable.
What to do: Clean the windshield and front grille sensor. If it stays on in clear weather, have it checked.
Electronic parking brake warning light
Stop safely · usual colour
The manual says: When the ignition switch is in the ON position, the electronic parking brake warning light illuminates and then turns off. The electronic parking brake warning light functions for the electronic parking brake system. If the warning light illuminates, it may indicate the electronic parking brake system is not functioning properly. For additional information, see “Parking brake”.
What to do: Have the system checked. It is recommended that you visit a NISSAN dealer for this service.
Front passenger air bag status light
Check soon · usual colour
The manual says: The front passenger air bag status light will be lit and the passenger front air bag and passenger knee air bag will be off depending on how the front passenger seat is being used.
What to do: Add Air” warning also appears in the vehicle information display. Add Air” warning appears each time the ignition switch is placed in the ON position as long as the low tire pressure warning light remains illuminated.
Rear Automatic Braking (RAB) system warning light
Check soon · usual colour
The manual says: This light comes on when the ignition switch is placed in the ON position. It turns off after the engine is started. This light illuminates when the RAB system is turned off in the vehicle information display. If the light illuminates or blinks when the RAB system is on, it may indicate that the system is unavailable. For additional information, see “Rear Automatic Braking (RAB)”.
What to do: Clean the windshield and front grille sensor. If it stays on in clear weather, have it checked.
Slip indicator light
Check soon · usual colour
The manual says: This indicator light will blink when the Vehicle Dynamic Control (VDC) system is operating, thus alerting the driver to the fact that the road surface is slippery and the vehicle is nearing its traction limits. You may feel or hear the system working; this is normal. The light will blink for a few seconds after the VDC system stops limiting wheel spin.
What to do: If it flashes, ease off and drive gently for the conditions. If it stays on, have the system checked.
Vehicle Dynamic Control (VDC) OFF indicator light
Check soon · usual colour
The manual says: This indicator light comes on when the VDC OFF switch is pushed to off. This indicates the VDC system has been turned off. Push the VDC OFF switch again or restart the engine and the system will operate normally. For additional information, see “Vehicle Dynamic Control (VDC) system” The VDC OFF indicator light also comes on when you place the ignition switch in the ON position.
What to do: It is recommended that you visit a NISSAN dealer for this service.
Automatic brake hold indicator light (white/green)
Information
The manual says: This light illuminates to show the status of the Automatic brake hold system. The automatic brake hold indicator light (white) illuminates when the automatic brake hold system is on standby. The automatic brake hold indicator light (green) illuminates when the automatic brake hold system is operating. For additional information, see “Automatic.
What to do: Nothing to do. Press the accelerator to drive off; the brakes release automatically.
High Beam Assist indicator light (green)
Information
The manual says: This indicator light illuminates when the headlights come on while the headlight switch is in the AUTO position with the high beams selected. This indicates that the high beam assist is operational. For additional information, see “Headlight and.
What to do: Dip them for oncoming traffic and when following another car.
High beam indicator light (blue)
Information
The manual says: This blue light comes on when the headlight high beams are on and goes out when the.
What to do: Dip them for oncoming traffic and when following another car.
Low beam indicator light (green)
Information
The manual says: This light comes on when the switch is turned to the position. The headlights will come on; and the front side, tail, number plate, and.
What to do: Nothing to do.
Side light and headlight indicator light (green)
Information
The manual says: The side light and headlight indicator light illuminates when the side light or headlight position is selected. For additional information, see “Headlight and turn signal switch”.
What to do: Nothing to do.
| Light | Colour | Meaning | |
|---|---|---|---|
| Low brake fluid warning light | Red* | When the ignition switch is placed in the ON position, the light warns of a low brake fluid level. If the light comes on while the engine is running with the parking brake not applied, stop the vehicle and perform the following: 1. For additional information, see “Brake fluid” 2. If the brake fluid level is correct, have the warning system checked. WARNING. | |
| Charge warning light | Red | If this light comes on while the engine is running, it may indicate the charging system is not functioning properly. If the belt is loose, broken, missing, or if the light remains on, have your vehicle serviced immediately. CAUTION Do not continue driving if the drive belt is loose, broken or missing. Electric power steering warning light (red) WARNING. | |
| Engine oil pressure warning light | Red* | This light warns of low engine oil pressure. If the light flickers or comes on during normal driving, pull off the road in a safe area, stop the engine immediately and call a NISSAN dealer or other authorized repair shop. The engine oil pressure warning light is not designed to indicate a low oil level. Use the dipstick to check the oil level. | |
| Electronic parking brake warning light | Red* | When the ignition switch is in the ON position, the electronic parking brake warning light illuminates and then turns off. The electronic parking brake warning light functions for the electronic parking brake system. If the warning light illuminates, it may indicate the electronic parking brake system is not functioning properly. For additional information, see “Parking brake”. | |
| Electric shift control system warning light | Amber* | This light illuminates when a malfunction occurs in the electric shift control system. When the master warning light illuminates, the chime sounds and the following message is displayed in the vehicle information display: “When parked apply parking brake”. When the ignition is placed in the OFF position, the chime sounds continuously. Ensure the parking brake is applied Have the system checked. | |
| Master warning light | Amber* | When the ignition is in the ON position, the master warning light illuminates if a warning message appears in the vehicle information display. For additional information, see “Vehicle information display” Seat belt warning light and chime; The light and chime remind you to fasten the seat belts. | |
| Steering Assist Hands Off warning light | Amber* | When the Steering Assist is activated, it monitors the driver’s steering wheel operation. If the steering wheel is not operated or the driver takes his/her hands off the steering wheel for a period of time, the warning light illuminates. | |
| Supplemental air bag warning light | Amber | When the ignition switch is placed in the ON position, the supplemental air bag warning light illuminates for about 7 seconds and then turns off. This means the system is operational. If any of the following conditions occur, the front air bag, side air bag, curtain air bag, and pretensioner seat belt systems need servicing: The supplemental air bag warning light remains on after approximately 7 seconds. | |
| Automatic Emergency Braking (AEB) with Pedestrian Detection system warning light | Amber | This light comes on when the ignition switch is placed in the ON position. It turns off after the engine is started. This light illuminates when the AEB with Pedestrian Detection system is set to OFF in the meter or when the Vehicle Dynamic Control (VDC) system is turned off. If the light illuminates when the AEB with Pedestrian Detection system is on, it may indicate that the system is unavailable. | |
| Front passenger air bag status light | Amber* | The front passenger air bag status light will be lit and the passenger front air bag and passenger knee air bag will be off depending on how the front passenger seat is being used. | |
| Rear Automatic Braking (RAB) system warning light | Amber* | This light comes on when the ignition switch is placed in the ON position. It turns off after the engine is started. This light illuminates when the RAB system is turned off in the vehicle information display. If the light illuminates or blinks when the RAB system is on, it may indicate that the system is unavailable. For additional information, see “Rear Automatic Braking (RAB)”. | |
| Slip indicator light | Amber* | This indicator light will blink when the Vehicle Dynamic Control (VDC) system is operating, thus alerting the driver to the fact that the road surface is slippery and the vehicle is nearing its traction limits. You may feel or hear the system working; this is normal. The light will blink for a few seconds after the VDC system stops limiting wheel spin. | |
| Vehicle Dynamic Control (VDC) OFF indicator light | Amber* | This indicator light comes on when the VDC OFF switch is pushed to off. This indicates the VDC system has been turned off. Push the VDC OFF switch again or restart the engine and the system will operate normally. For additional information, see “Vehicle Dynamic Control (VDC) system” The VDC OFF indicator light also comes on when you place the ignition switch in the ON position. | |
| High Beam Assist indicator light (green) | Green | This indicator light illuminates when the headlights come on while the headlight switch is in the AUTO position with the high beams selected. This indicates that the high beam assist is operational. For additional information, see “Headlight and. | |
| Low beam indicator light (green) | Green | This light comes on when the switch is turned to the position. The headlights will come on; and the front side, tail, number plate, and. | |
| Side light and headlight indicator light (green) | Green | The side light and headlight indicator light illuminates when the side light or headlight position is selected. For additional information, see “Headlight and turn signal switch”. | |
| High beam indicator light (blue) | Blue | This blue light comes on when the headlight high beams are on and goes out when the. | |
| Automatic brake hold indicator light (white/green) | White | This light illuminates to show the status of the Automatic brake hold system. The automatic brake hold indicator light (white) illuminates when the automatic brake hold system is on standby. The automatic brake hold indicator light (green) illuminates when the automatic brake hold system is operating. For additional information, see “Automatic. |
Source: 2025 Nissan Murano Owner's Manual; 2026 Nissan Murano Owner's Manual. * Usual colour; the manual text doesn't state it.
2018 to 2024 Murano warning lights
Brake warning light
Stop safely · usual colour
The manual says: This light functions for both the parking.
What to do: Check the parking brake is fully released. If the light stays on, the brakes may not work properly: stop and get help rather than driving on.
Low brake fluid warning light
Stop safely · usual colour
The manual says: When the ignition switch is placed in the ON position, the light warns of a low brake fluid level. If the light comes on while the engine is running with the parking brake not applied, stop the vehicle and perform the following: 1. For additional information, see “Brake fluid” 2. If the brake fluid level is correct, have the warning system checked. WARNING.
What to do: Check the brake fluid level. Add brake fluid as necessary. It is recommended that you visit a NISSAN dealer for this service.
Charge warning light
Stop safely · usual colour
The manual says: If this light comes on while the engine is running, it may indicate the charging system is not functioning properly. If the belt is loose, broken, missing, or if the light remains on, have your vehicle serviced immediately. CAUTION Do not continue driving if the drive belt is loose, broken or missing. 2-10 Instruments and controls.
What to do: Turn the engine off and check the drive belt. It is recommended that you visit a NISSAN dealer for this service.
More about the battery / charging system light · Shop jump starters on Amazon
Engine oil pressure warning light
Stop safely · usual colour
The manual says: This light warns of low engine oil pressure. If the light flickers or comes on during normal driving, pull off the road in a safe area, stop the engine immediately and call a NISSAN dealer or other authorized repair shop. The engine oil pressure warning light is not designed to indicate a low oil level. Use the dipstick to check the oil level.
What to do: Pull over safely and turn the engine off. Check the oil level when the engine has cooled. If the level is fine and the light stays on, have it towed.
More about the oil pressure warning light · Shop engine oils on Amazon
Master warning light
Check soon · usual colour
The manual says: When the ignition switch is in the ON position, the master warning light illuminates if any of the following are displayed on the vehicle information display: Parking brake release warning; Door open warning (when vehicle is moving); Shift into Park warning; LED Headlight Failure warning (when red warning exists) For additional information, see “Vehicle information display” Seat belt warning light and chime.
What to do: Read the message on the multi-information display. Red means stop safely; amber means get it checked.
Security indicator light
Check soon · usual colour
The manual says: This light blinks when the ignition switch is placed in the OFF, LOCK or ACC position. The blinking security indicator light indicates that the security systems equipped on the vehicle are operational. For additional information, see “Security systems”.
What to do: Hold the key fob against the start button and start again. If it keeps happening, replace the key fob battery.
More about the key / immobilizer light · Shop key fob batterys on Amazon
Supplemental air bag warning light
Check soon
The manual says: When the ignition switch is placed in the ON position, the supplemental air bag warning light illuminates for about 7 seconds and then turns off. This means the system is operational. If any of the following conditions occur, the front air bag, side air bag, curtain air bag, and pretensioner seat belt systems need servicing: The supplemental air bag warning light remains on after approximately 7 seconds.
What to do: It is recommended that you visit a NISSAN dealer for these services. It is recommended that you visit a NISSAN dealer for this service.
Anti-lock Braking System (ABS) warning light
Check soon · usual colour
The manual says: When the ignition switch is placed in the ON position, the ABS warning light illuminates and then turns off. This indicates the ABS is operational. If the ABS warning light illuminates while the engine is running or while driving, it may indicate the ABS is not functioning properly. If an ABS malfunction occurs, the anti-lock function is turned off.
What to do: Have the system checked. It is recommended that you visit a NISSAN dealer for this service.
Automatic Emergency Braking (AEB) with Pedestrian Detection system warning light
Check soon · usual colour
The manual says: This light comes on when the ignition switch is placed in the ON position. It turns off after the engine is started. This light illuminates when the AEB with Pedestrian Detection system is set to OFF in the meter or when the Vehicle Dynamic Control (VDC) system is turned off. If the light illuminates or blinks when the AEB with Pedestrian Detection system is on, it may indicate that the system is unavailable.
What to do: Clean the windshield and front grille sensor. If it stays on in clear weather, have it checked.
Front passenger air bag status light
Check soon · usual colour
The manual says: The front passenger air bag status light will be lit and the passenger front air bag and passenger knee air bag will be off depending on how the front passenger seat is being used.
What to do: Add Air” warning also appears in the vehicle information display. Add Air” warning appears each time the ignition switch is placed in the ON position as long as the low tire pressure warning light remains illuminated. Have the system checked. It is recommended that you visit a NISSAN dealer for this service. It is recommended that you visit a NISSAN dealer for this service.
Malfunction Indicator Light (MIL)
Check soon · usual colour
The manual says: If this indicator light comes on steady or blinks while the engine is running, it may indicate a potential emission control malfunction. The MIL may also come on steady if the fuel-filler cap is loose or missing, or if the vehicle runs out of fuel. 4 liters) of fuel in the fuel tank. After a few driving trips, the light should turn off if no other potential emission control system malfunction exists.
What to do: Check to make sure the fuel-filler cap is installed and closed tightly, and that the vehicle has at least 3 gallons (11.
More about the check engine light · Shop OBD2 scanners on Amazon
Rear Automatic Braking (RAB) system warning light
Check soon · usual colour
The manual says: This light comes on when the ignition switch is placed in the ON position. It turns off after the engine is started. This light illuminates when the RAB system is turned off in the vehicle information display. If the light illuminates or blinks when the RAB system is on, it may indicate that the system is unavailable. For additional information, see “Rear Automatic Braking (RAB)”.
What to do: Clean the windshield and front grille sensor. If it stays on in clear weather, have it checked.
Slip indicator light
Check soon · usual colour
The manual says: This indicator light will blink when the Vehicle Dynamic Control (VDC) system is operating, thus alerting the driver to the fact that the road surface is slippery and the vehicle is nearing its traction limits. You may feel or hear the system working; this is normal. The light will blink for a few seconds after the VDC system stops limiting wheel spin.
What to do: If it flashes, ease off and drive gently for the conditions. If it stays on, have the system checked.
Vehicle Dynamic Control (VDC) OFF indicator light
Check soon · usual colour
The manual says: This indicator light comes on when the VDC OFF switch is pushed to off. This indicates the VDC system has been turned off. Push the VDC OFF switch again or restart the engine and the system will operate normally. For additional information, see “Vehicle Dynamic Control (VDC) system” The VDC OFF indicator light also comes on when you place the ignition switch in the ON position.
What to do: It is recommended that you visit a NISSAN dealer for this service.
Front fog light indicator light (green)
Information
The manual says: The front fog light indicator light illuminates when the front fog lights are on. For additional information, see.
What to do: Turn them off when visibility is good, as they can dazzle other drivers.
High Beam Assist indicator light (green)
Information
The manual says: This indicator light illuminates when the headlights come on while the headlight switch is in the AUTO position with the high beams selected. This indicates that the high beam assist is operational. For additional information, see “Headlight.
What to do: Dip them for oncoming traffic and when following another car.
High beam indicator light (blue)
Information
The manual says: This blue light comes on when the headlight high beams are on and goes out when.
What to do: Dip them for oncoming traffic and when following another car.
Side light and headlight indicator light (green)
Information
The manual says: The side light and headlight indicator light illuminates when the side light or headlight position is selected. For additional information, see “Headlight and turn signal switch” Both lights flash when the hazard switch is turned on.
What to do: Turn signal/hazard indicator lights (green) The appropriate light flashes when the turn signal switch is activated.
Brightness indicator
Check soon · usual colour
The manual says: This indicator shows the brightness adjustment of the instrument panel. For additional information, see “Instrument brightness control” This message alerts the driver, after a period of time, to check for items in the rear seats after the audible alert has been provided.
What to do: Check Rear Seat For All Articles When the system is enabled, this message appears when the vehicle comes to a complete stop, the vehicle is transitioned from the D (Drive) position to P (Park) position, and the driver exits the vehicle.
Transmission Shift Position indicator
Check soon · usual colour
The manual says: This indicator shows the transmission shift position. AWD Error: See Owner’s Manual This warning appears when the all-wheel drive system is not functioning properly while the engine is running. AWD High Temp. The driving mode may change to 2-Wheel Drive (2WD). If this warning is displayed, stop the vehicle with the engine idling, as soon as it is safe to do so.
What to do: Stop Vehicle This warning may appear while trying to free a stuck vehicle due to increased oil temperature. Check that all the tire sizes are the same, that the tire pressure is correct and that the tires are not excessively worn. It is recommended that you visit a NISSAN dealer for this service.
Blind Spot Warning (BSW) and Rear Cross Traffic Alert (RCTA) indicator
Check soon · usual colour
The manual says: This indicator appears when the BSW and RCTA systems are engaged. For additional information, see “Blind Spot Warning (BSW)” and “Rear Cross.
What to do: Clean the rear bumper corners where the sensors sit. If it stays on, have it checked.
Cruise control indicator
Information · usual colour
The manual says: These indicators show the cruise control system status. For additional information, see “Intelligent Cruise control (ICC)” Cruise ON: Press SET to engage speed control This message appears if the cruise control switch on the steering wheel is pressed and Cruise Control Alerts are enabled in the vehicle information display.
What to do: Take a Break? This alert appears when the system has detected that the driver may be displaying fatigue or a lack of attention.
Lane Departure Warning (LDW)/ Intelligent Lane Intervention (I-LI) indicator
Check soon · usual colour
The manual says: This indicator appears when the LDW and/or Intelligent Lane Intervention (I-LI) systems are engaged. For additional information, see “Lane Departure Warning (LDW)” and “Intelligent Lane Intervention (I-LI)” Parking Sensor Error: See Owner’s Manual This warning appears when there is an error with the system.
What to do: If amber, clean the windshield in front of the camera. If it stays amber, have it checked.
Rear Automatic Braking (RAB) system indicator
Check soon · usual colour
The manual says: This indicator appears to indicate the status of the Rear Automatic Braking (RAB) system. For additional information, see “Rear Automatic Braking (RAB)”.
What to do: Clean the windshield and front grille sensor. If it stays on in clear weather, have it checked.
Speed Limit Sign indicator
Check soon · usual colour
The manual says: This message may appear when the Traffic Sign Recognition system is engaged. For additional information, see “Traffic Sign Recognition” Target Speed SET with Intelligent Distance Control This message will appear if the Intelligent Cruise Control system is on when the SET switch is pushed and the Cruise Control Alerts are enabled.
Vehicle ahead detection indicator
Check soon · usual colour
The manual says: This indicator appears when the Automatic Emergency Braking (AEB) with Pedestrian Detection system is engaged and has detected a vehicle. For additional information, see “Automatic Emergency Braking (AEB) with Pedestrian Detection” Your vehicle has two types of security systems: Vehicle security system.
What to do: Check with your insurance company to see if you may be eligible for discounts for various theft protection features. Close all windows and the moonroof (if so equipped).
| Light | Colour | Meaning | |
|---|---|---|---|
| Brake warning light | Red* | This light functions for both the parking. | |
| Low brake fluid warning light | Red* | When the ignition switch is placed in the ON position, the light warns of a low brake fluid level. If the light comes on while the engine is running with the parking brake not applied, stop the vehicle and perform the following: 1. For additional information, see “Brake fluid” 2. If the brake fluid level is correct, have the warning system checked. WARNING. | |
| Charge warning light | Red* | If this light comes on while the engine is running, it may indicate the charging system is not functioning properly. If the belt is loose, broken, missing, or if the light remains on, have your vehicle serviced immediately. CAUTION Do not continue driving if the drive belt is loose, broken or missing. 2-10 Instruments and controls. | |
| Engine oil pressure warning light | Red* | This light warns of low engine oil pressure. If the light flickers or comes on during normal driving, pull off the road in a safe area, stop the engine immediately and call a NISSAN dealer or other authorized repair shop. The engine oil pressure warning light is not designed to indicate a low oil level. Use the dipstick to check the oil level. | |
| Master warning light | Amber* | When the ignition switch is in the ON position, the master warning light illuminates if any of the following are displayed on the vehicle information display: Parking brake release warning; Door open warning (when vehicle is moving); Shift into Park warning; LED Headlight Failure warning (when red warning exists) For additional information, see “Vehicle information display” Seat belt warning light and chime. | |
| Security indicator light | Amber* | This light blinks when the ignition switch is placed in the OFF, LOCK or ACC position. The blinking security indicator light indicates that the security systems equipped on the vehicle are operational. For additional information, see “Security systems”. | |
| Supplemental air bag warning light | Amber | When the ignition switch is placed in the ON position, the supplemental air bag warning light illuminates for about 7 seconds and then turns off. This means the system is operational. If any of the following conditions occur, the front air bag, side air bag, curtain air bag, and pretensioner seat belt systems need servicing: The supplemental air bag warning light remains on after approximately 7 seconds. | |
| Anti-lock Braking System (ABS) warning light | Amber* | When the ignition switch is placed in the ON position, the ABS warning light illuminates and then turns off. This indicates the ABS is operational. If the ABS warning light illuminates while the engine is running or while driving, it may indicate the ABS is not functioning properly. If an ABS malfunction occurs, the anti-lock function is turned off. | |
| Automatic Emergency Braking (AEB) with Pedestrian Detection system warning light | Amber* | This light comes on when the ignition switch is placed in the ON position. It turns off after the engine is started. This light illuminates when the AEB with Pedestrian Detection system is set to OFF in the meter or when the Vehicle Dynamic Control (VDC) system is turned off. If the light illuminates or blinks when the AEB with Pedestrian Detection system is on, it may indicate that the system is unavailable. | |
| Front passenger air bag status light | Amber* | The front passenger air bag status light will be lit and the passenger front air bag and passenger knee air bag will be off depending on how the front passenger seat is being used. | |
| Malfunction Indicator Light (MIL) | Amber* | If this indicator light comes on steady or blinks while the engine is running, it may indicate a potential emission control malfunction. The MIL may also come on steady if the fuel-filler cap is loose or missing, or if the vehicle runs out of fuel. 4 liters) of fuel in the fuel tank. After a few driving trips, the light should turn off if no other potential emission control system malfunction exists. | |
| Rear Automatic Braking (RAB) system warning light | Amber* | This light comes on when the ignition switch is placed in the ON position. It turns off after the engine is started. This light illuminates when the RAB system is turned off in the vehicle information display. If the light illuminates or blinks when the RAB system is on, it may indicate that the system is unavailable. For additional information, see “Rear Automatic Braking (RAB)”. | |
| Slip indicator light | Amber* | This indicator light will blink when the Vehicle Dynamic Control (VDC) system is operating, thus alerting the driver to the fact that the road surface is slippery and the vehicle is nearing its traction limits. You may feel or hear the system working; this is normal. The light will blink for a few seconds after the VDC system stops limiting wheel spin. | |
| Vehicle Dynamic Control (VDC) OFF indicator light | Amber* | This indicator light comes on when the VDC OFF switch is pushed to off. This indicates the VDC system has been turned off. Push the VDC OFF switch again or restart the engine and the system will operate normally. For additional information, see “Vehicle Dynamic Control (VDC) system” The VDC OFF indicator light also comes on when you place the ignition switch in the ON position. | |
| Brightness indicator | Amber* | This indicator shows the brightness adjustment of the instrument panel. For additional information, see “Instrument brightness control” This message alerts the driver, after a period of time, to check for items in the rear seats after the audible alert has been provided. | |
| Transmission Shift Position indicator | Amber* | This indicator shows the transmission shift position. AWD Error: See Owner’s Manual This warning appears when the all-wheel drive system is not functioning properly while the engine is running. AWD High Temp. The driving mode may change to 2-Wheel Drive (2WD). If this warning is displayed, stop the vehicle with the engine idling, as soon as it is safe to do so. | |
| Blind Spot Warning (BSW) and Rear Cross Traffic Alert (RCTA) indicator | Amber* | This indicator appears when the BSW and RCTA systems are engaged. For additional information, see “Blind Spot Warning (BSW)” and “Rear Cross. | |
| Lane Departure Warning (LDW)/ Intelligent Lane Intervention (I-LI) indicator | Amber* | This indicator appears when the LDW and/or Intelligent Lane Intervention (I-LI) systems are engaged. For additional information, see “Lane Departure Warning (LDW)” and “Intelligent Lane Intervention (I-LI)” Parking Sensor Error: See Owner’s Manual This warning appears when there is an error with the system. | |
| Rear Automatic Braking (RAB) system indicator | Amber* | This indicator appears to indicate the status of the Rear Automatic Braking (RAB) system. For additional information, see “Rear Automatic Braking (RAB)”. | |
| Speed Limit Sign indicator | Amber* | This message may appear when the Traffic Sign Recognition system is engaged. For additional information, see “Traffic Sign Recognition” Target Speed SET with Intelligent Distance Control This message will appear if the Intelligent Cruise Control system is on when the SET switch is pushed and the Cruise Control Alerts are enabled. | |
| Vehicle ahead detection indicator | Amber* | This indicator appears when the Automatic Emergency Braking (AEB) with Pedestrian Detection system is engaged and has detected a vehicle. For additional information, see “Automatic Emergency Braking (AEB) with Pedestrian Detection” Your vehicle has two types of security systems: Vehicle security system. | |
| Front fog light indicator light (green) | Green | The front fog light indicator light illuminates when the front fog lights are on. For additional information, see. | |
| High Beam Assist indicator light (green) | Green | This indicator light illuminates when the headlights come on while the headlight switch is in the AUTO position with the high beams selected. This indicates that the high beam assist is operational. For additional information, see “Headlight. | |
| Side light and headlight indicator light (green) | Green | The side light and headlight indicator light illuminates when the side light or headlight position is selected. For additional information, see “Headlight and turn signal switch” Both lights flash when the hazard switch is turned on. | |
| Cruise control indicator | Green* | These indicators show the cruise control system status. For additional information, see “Intelligent Cruise control (ICC)” Cruise ON: Press SET to engage speed control This message appears if the cruise control switch on the steering wheel is pressed and Cruise Control Alerts are enabled in the vehicle information display. | |
| High beam indicator light (blue) | Blue | This blue light comes on when the headlight high beams are on and goes out when. |
Source: 2018 Nissan Murano Owner's Manual; 2019 Nissan Murano Owner's Manual; 2020 Nissan Murano Owner's Manual and others. * Usual colour; the manual text doesn't state it.
2015 to 2017 Murano warning lights
Front passenger air bag status light
Check soon · usual colour
The manual says: The front passenger air bag status light will be lit and the passenger front air bag will be OFF depending on how the front passenger seat is being used. For additional information, refer to “Front passenger air bag and status light” in the “Safety — Seats, seat belts and supplemental restraint sys.
What to do: The car drives normally, but get it checked soon. Do not try to repair airbag parts yourself.
High beam indicator light (blue)
Information
The manual says: This blue light comes on when the headlight high beams are on and goes out when the low beams are selected. The high beam indicator light also comes on when the passing signal is activated.
What to do: Dip them for oncoming traffic and when following another car.
Malfunction Indicator Light (MIL)
Check soon · usual colour
The manual says: If this indicator light comes on steady or blinks while the engine is running, it may indicate a potential emission control malfunction. The MIL may also come on steady if the fuel-filler cap is loose or missing, or if the vehicle runs out of fuel. 4 liters) of fuel in the fuel tank. After a few driving trips, the light should turn off if no other potential emission control system malfunction exists.
What to do: Check to make sure the fuel-filler cap is installed and closed tightly, and that the vehicle has at least 3 gallons (11.
More about the check engine light · Shop OBD2 scanners on Amazon
Security indicator light
Check soon · usual colour
The manual says: This light blinks when the ignition switch is placed in the OFF, LOCK or ACC (if so equipped) position. The blinking security indicator light indicates that the security systems equipped on the vehicle are operational. For additional information, refer to “Security sys.
What to do: Hold the key fob against the start button and start again. If it keeps happening, replace the key fob battery.
More about the key / immobilizer light · Shop key fob batterys on Amazon
Side light and headlight indicator light (green)
Information
The manual says: The side light and headlight indicator light illuminates when the side light or headlight position is selected. For additional information, refer to “Headlight and turn signal switch” in this section.
What to do: Nothing to do.
Slip indicator light
Information
The manual says: This indicator will blink when the VDC system is operating, thus alerting the driver to the fact that the road surface is slippery and the vehicle is nearing its traction limits. You may feel or hear the system working; this is normal. The light will blink for a few seconds after the VDC system stops limiting wheel spin. The indicator light also comes on when you place the ignition switch in the ON position.
What to do: It is recommended that you visit a NISSAN dealer for this service.
Vehicle Dynamic Control (VDC) OFF indicator light
Check soon · usual colour
The manual says: This indicator light comes on when the VDC OFF switch is pushed to off. This indicates the VDC system is not operating. Push the VDC OFF switch again or restart the engine and the system will operate normally. For additional information, refer to “Vehicle Dynamic Control (VDC) system” in the “Starting and driving” section of this manual.
What to do: It is recommended that you visit a NISSAN dealer for this service.
| Light | Colour | Meaning | |
|---|---|---|---|
| Front passenger air bag status light | Amber* | The front passenger air bag status light will be lit and the passenger front air bag will be OFF depending on how the front passenger seat is being used. For additional information, refer to “Front passenger air bag and status light” in the “Safety — Seats, seat belts and supplemental restraint sys. | |
| Malfunction Indicator Light (MIL) | Amber* | If this indicator light comes on steady or blinks while the engine is running, it may indicate a potential emission control malfunction. The MIL may also come on steady if the fuel-filler cap is loose or missing, or if the vehicle runs out of fuel. 4 liters) of fuel in the fuel tank. After a few driving trips, the light should turn off if no other potential emission control system malfunction exists. | |
| Security indicator light | Amber* | This light blinks when the ignition switch is placed in the OFF, LOCK or ACC (if so equipped) position. The blinking security indicator light indicates that the security systems equipped on the vehicle are operational. For additional information, refer to “Security sys. | |
| Vehicle Dynamic Control (VDC) OFF indicator light | Amber* | This indicator light comes on when the VDC OFF switch is pushed to off. This indicates the VDC system is not operating. Push the VDC OFF switch again or restart the engine and the system will operate normally. For additional information, refer to “Vehicle Dynamic Control (VDC) system” in the “Starting and driving” section of this manual. | |
| Side light and headlight indicator light (green) | Green | The side light and headlight indicator light illuminates when the side light or headlight position is selected. For additional information, refer to “Headlight and turn signal switch” in this section. | |
| Slip indicator light | Green | This indicator will blink when the VDC system is operating, thus alerting the driver to the fact that the road surface is slippery and the vehicle is nearing its traction limits. You may feel or hear the system working; this is normal. The light will blink for a few seconds after the VDC system stops limiting wheel spin. The indicator light also comes on when you place the ignition switch in the ON position. | |
| High beam indicator light (blue) | Blue | This blue light comes on when the headlight high beams are on and goes out when the low beams are selected. The high beam indicator light also comes on when the passing signal is activated. |
Source: 2015 Nissan Murano Owner's Manual; 2016 Nissan Murano Owner's Manual; 2017 Nissan Murano Owner's Manual. * Usual colour; the manual text doesn't state it.
2010 to 2014 Murano warning lights
All-Wheel Drive (AWD) warning light (AWD models)
Information · usual colour
The manual says: The light comes on when the ignition switch is pushed to ON. It turns off soon after the engine is started. If the AWD system malfunctions, or the diameter of the front and the rear wheels are different, the warning light will either remain illuminated or blink. ( Starting and driving” section.) CAUTION. If the warning light comes on while driving there may be a malfunction in the AWD system..
What to do: Reduce the vehicle speed and have your vehicle checked by a NISSAN dealer as soon as possible. Check that all tire sizes are the same, tire pressure is correct and tires are not worn.
Anti-lock Braking System (ABS) warning light
Check soon · usual colour
The manual says: When the ignition switch is in the ON position, the Anti-lock Braking System (ABS) warning light illuminates and then turns off. This indicates the ABS is operational. If the ABS warning light illuminates while the engine is running, or while driving, it may indicate the ABS is not functioning properly. If an ABS malfunction occurs, the anti-lock function is turned off.
What to do: Have the system checked by a NISSAN dealer.
Brake warning light
Stop safely · usual colour
The manual says: This light functions for both the parking brake and the foot brake systems. Parking brake indicator: When the ignition switch is in the ON position, the light comes on when the parking brake is applied. Low brake fluid warning light: When the ignition switch is in the ON position, the light warns of a low brake fluid level.
What to do: Check the brake fluid level. Add brake fluid as necessary. Have the brake system checked, and if necessary repaired, by a NISSAN dealer promptly.
Charge warning light
Stop safely · usual colour
The manual says: If the light comes on while the engine is running, it may indicate the charging system is not functioning properly. If the belt is loose, broken, missing or if the light remains on, see a NISSAN dealer immediately. CAUTION Do not continue driving if the alternator belt is loose, broken or missing. Instruments and controls 2-13.
What to do: Turn the engine off and check the alternator belt.
More about the battery / charging system light · Shop jump starters on Amazon
Engine oil pressure warning light
Stop safely · usual colour
The manual says: This light warns of low engine oil pressure. If the light flickers or comes on during normal driving, pull off the road in a safe area, stop the engine immediately and call a NISSAN dealer or other authorized repair shop. The engine oil pressure warning light is not designed to indicate a low oil level. Use the dipstick to check the oil level.
What to do: Turn off the engine as soon as it is safe to do so.
More about the oil pressure warning light · Shop engine oils on Amazon
Master warning light
Check soon · usual colour
The manual says: When the ignition switch is in the ON position, the master warning light illuminates if any of the following are displayed on the dot matrix liquid crystal display:. No key warning. Low fuel warning. Low washer fluid warning. Parking brake release warning. Door/lift gate open warning (Hardtop models). Door/trunk open warning (Cross Cabriolet models). Loose fuel cap warning. Extended storage fuse warning later in this.
What to do: Check tire pressure warning.
Seat belt warning light
Information · usual colour
The manual says: The light and chime remind you to fasten seat belts. The light illuminates whenever the ignition switch is pushed to the ON position, and will remain illuminated until the driver’s seat belt is fastened. The seat belt warning light for the front passenger will illuminate if the seat belt is not fastened when the front passenger’s seat is occupied.
What to do: Fasten all seat belts. If it stays on with everyone belted, a heavy bag on a seat can trigger it.
Vehicle dynamic control (VDC) warning light
Check soon · usual colour
The manual says: The light will blink when the Vehicle Dynamic Control (VDC) system or the traction control system is operating, thus alerting the driver that the vehicle is nearing its traction limits. The road surface may be slippery.
What to do: Have the system checked by a NISSAN dealer.
All-Wheel Drive (AWD) LOCK indicator light (AWD models)
Information · usual colour
The manual says: This light illuminates when the ignition switch is placed in the ON position, and turns off within 1 second. When selecting the LOCK mode while the engine is running, this light will illuminate. ( Starting and.
What to do: If amber or flashing, the system has a fault or is overheating: drive gently and have it checked.
Exterior light indicator
Check soon · usual colour
The manual says: This indicator illuminates when the headlight switch is turned to the AUTO (if so equipped), or position and the front parking lights, instrument panel lights, tail lights, license plate lights or headlights are on. The indicator turns off when these lights are turned off.
High beam indicator light
Information · usual colour
The manual says: This light comes on when the headlight high beam is on and goes out when the low beam is selected. Instruments and controls 2-17.
What to do: Dip them for oncoming traffic and when following another car.
Malfunction Indicator Light (MIL)
Check soon · usual colour
The manual says: If the malfunction indicator light comes on steady or blinks while the engine is running, it may indicate a potential emission control and/or Continuously Variable Transmission (CVT) malfunction. The malfunction indicator light may also come on steady if the fuel-filler cap is loose or missing, or if the vehicle runs out of fuel. 4 liters) of fuel in the fuel tank.
What to do: Check to make sure the fuel-filler cap is installed and closed tightly, and that the vehicle has at least 3 US gallons (11. Check the fuelfiller cap if the LOOSE FUEL CAP warning appears on the dot matrix liquid crystal display. Have the vehicle inspected by a NISSAN dealer.
More about the check engine light · Shop OBD2 scanners on Amazon
Overdrive off indicator light
Check soon · usual colour
The manual says: The overdrive off indicator light illuminates when the overdrive off mode is selected. For additional information, see “Continuously Variable Transmission (CVT)” in the “5. Starting and driving” section of this manual.
Soft top indicator light (CrossCabriolet models)
Check soon · usual colour
The manual says: This light illuminates when the soft top is being operated or it is stopped before reaching a full open/close state. When the top is fully opened or closed, the light will turn off. The light blinks while the soft top is not fully opened or closed under the following conditions:. When the vehicle is driven.. When the shift lever is in the R (Reverse) position.
What to do: Release the operating switch, and push it again under the above conditions until the top is fully opened or closed. Have your vehicle checked by a NISSAN dealer as soon as possible. Turn signal/hazard indicator lights The light flashes when the turn signal switch lever or hazard switch is turned on.
Vehicle Dynamic Control (VDC) off indicator light
Check soon · usual colour
The manual says: The light comes on when the Vehicle Dynamic Control (VDC) off switch is pushed to OFF. This indicates that the VDC system is not operating. For additional information, see “Vehicle Dynamic Control (VDC) system” in the “5. Starting and driving” section of this manual. Instruments and controls 2-19.
What to do: Turn it back on unless you are stuck in snow or mud. It normally turns on again with the next start.
Key insertion indicator
Check soon · usual colour
The manual says: This indicator appears when the key needs to be inserted into the key port. (For example, the Intelligent Key battery is discharged.) If this indicator appears, insert the key into the key port in the correct direction. (See “Push Instruments and controls 2-21.
What to do: Hold the key fob against the start button and start again. If it keeps happening, replace the key fob battery.
More about the key / immobilizer light · Shop key fob batterys on Amazon
Key removal indicator
Check soon · usual colour
The manual says: This indicator appears when the driver’s door is opened with the ignition switch in the OFF or LOCK position and the key placed in the key port. A key reminder chime also sounds. If this indicator appears, remove the key from the key port and take it with you when leaving the vehicle. 4. NO KEY warning This warning appears in either of the following conditions.
What to do: Make sure that the Intelligent Key is inside the vehicle.
More about the key / immobilizer light · Shop key fob batterys on Amazon
Key battery discharge indicator
Check soon · usual colour
The manual says: This indicator appears when the key battery is running out of power. If this indicator appears, replace the battery with a new one. ( Maintenance and do-it-yourself” section.) 8. Clean Rear Camera warning (if so equipped) This warning appears if dirt, rain or snow accumulates on the rear camera and cannot be removed by the automatic washer and blower. Starting and driving” section. 9.
What to do: Stop the vehicle and release the parking brake. Refuel as soon as it is convenient, preferably before the fuel gauge reaches the empty (E) position.
More about the key / immobilizer light · Shop key fob batterys on Amazon
Tire replacement indicator
Check soon · usual colour
The manual says: This indicator appears when the customer set distance comes for replacing tires. You can set or reset the distance for replacing tires. ( later in this section.) WARNING The tire replacement indicator is not a substitute for regular tire checks, including tire pressure checks. Maintenance and do-it-yourself” section.
| Light | Colour | Meaning | |
|---|---|---|---|
| Brake warning light | Red* | This light functions for both the parking brake and the foot brake systems. Parking brake indicator: When the ignition switch is in the ON position, the light comes on when the parking brake is applied. Low brake fluid warning light: When the ignition switch is in the ON position, the light warns of a low brake fluid level. | |
| Charge warning light | Red* | If the light comes on while the engine is running, it may indicate the charging system is not functioning properly. If the belt is loose, broken, missing or if the light remains on, see a NISSAN dealer immediately. CAUTION Do not continue driving if the alternator belt is loose, broken or missing. Instruments and controls 2-13. | |
| Engine oil pressure warning light | Red* | This light warns of low engine oil pressure. If the light flickers or comes on during normal driving, pull off the road in a safe area, stop the engine immediately and call a NISSAN dealer or other authorized repair shop. The engine oil pressure warning light is not designed to indicate a low oil level. Use the dipstick to check the oil level. | |
| Anti-lock Braking System (ABS) warning light | Amber* | When the ignition switch is in the ON position, the Anti-lock Braking System (ABS) warning light illuminates and then turns off. This indicates the ABS is operational. If the ABS warning light illuminates while the engine is running, or while driving, it may indicate the ABS is not functioning properly. If an ABS malfunction occurs, the anti-lock function is turned off. | |
| Master warning light | Amber* | When the ignition switch is in the ON position, the master warning light illuminates if any of the following are displayed on the dot matrix liquid crystal display:. No key warning. Low fuel warning. Low washer fluid warning. Parking brake release warning. Door/lift gate open warning (Hardtop models). Door/trunk open warning (Cross Cabriolet models). Loose fuel cap warning. Extended storage fuse warning later in this. | |
| Vehicle dynamic control (VDC) warning light | Amber* | The light will blink when the Vehicle Dynamic Control (VDC) system or the traction control system is operating, thus alerting the driver that the vehicle is nearing its traction limits. The road surface may be slippery. | |
| Exterior light indicator | Amber* | This indicator illuminates when the headlight switch is turned to the AUTO (if so equipped), or position and the front parking lights, instrument panel lights, tail lights, license plate lights or headlights are on. The indicator turns off when these lights are turned off. | |
| Malfunction Indicator Light (MIL) | Amber* | If the malfunction indicator light comes on steady or blinks while the engine is running, it may indicate a potential emission control and/or Continuously Variable Transmission (CVT) malfunction. The malfunction indicator light may also come on steady if the fuel-filler cap is loose or missing, or if the vehicle runs out of fuel. 4 liters) of fuel in the fuel tank. | |
| Overdrive off indicator light | Amber* | The overdrive off indicator light illuminates when the overdrive off mode is selected. For additional information, see “Continuously Variable Transmission (CVT)” in the “5. Starting and driving” section of this manual. | |
| Soft top indicator light (CrossCabriolet models) | Amber* | This light illuminates when the soft top is being operated or it is stopped before reaching a full open/close state. When the top is fully opened or closed, the light will turn off. The light blinks while the soft top is not fully opened or closed under the following conditions:. When the vehicle is driven.. When the shift lever is in the R (Reverse) position. | |
| Vehicle Dynamic Control (VDC) off indicator light | Amber* | The light comes on when the Vehicle Dynamic Control (VDC) off switch is pushed to OFF. This indicates that the VDC system is not operating. For additional information, see “Vehicle Dynamic Control (VDC) system” in the “5. Starting and driving” section of this manual. Instruments and controls 2-19. | |
| Key insertion indicator | Amber* | This indicator appears when the key needs to be inserted into the key port. (For example, the Intelligent Key battery is discharged.) If this indicator appears, insert the key into the key port in the correct direction. (See “Push Instruments and controls 2-21. | |
| Key removal indicator | Amber* | This indicator appears when the driver’s door is opened with the ignition switch in the OFF or LOCK position and the key placed in the key port. A key reminder chime also sounds. If this indicator appears, remove the key from the key port and take it with you when leaving the vehicle. 4. NO KEY warning This warning appears in either of the following conditions. | |
| Key battery discharge indicator | Amber* | This indicator appears when the key battery is running out of power. If this indicator appears, replace the battery with a new one. ( Maintenance and do-it-yourself” section.) 8. Clean Rear Camera warning (if so equipped) This warning appears if dirt, rain or snow accumulates on the rear camera and cannot be removed by the automatic washer and blower. Starting and driving” section. 9. | |
| Tire replacement indicator | Amber* | This indicator appears when the customer set distance comes for replacing tires. You can set or reset the distance for replacing tires. ( later in this section.) WARNING The tire replacement indicator is not a substitute for regular tire checks, including tire pressure checks. Maintenance and do-it-yourself” section. | |
| All-Wheel Drive (AWD) warning light (AWD models) | Green* | The light comes on when the ignition switch is pushed to ON. It turns off soon after the engine is started. If the AWD system malfunctions, or the diameter of the front and the rear wheels are different, the warning light will either remain illuminated or blink. ( Starting and driving” section.) CAUTION. If the warning light comes on while driving there may be a malfunction in the AWD system.. | |
| Seat belt warning light | Green* | The light and chime remind you to fasten seat belts. The light illuminates whenever the ignition switch is pushed to the ON position, and will remain illuminated until the driver’s seat belt is fastened. The seat belt warning light for the front passenger will illuminate if the seat belt is not fastened when the front passenger’s seat is occupied. | |
| All-Wheel Drive (AWD) LOCK indicator light (AWD models) | Green* | This light illuminates when the ignition switch is placed in the ON position, and turns off within 1 second. When selecting the LOCK mode while the engine is running, this light will illuminate. ( Starting and. | |
| High beam indicator light | Blue* | This light comes on when the headlight high beam is on and goes out when the low beam is selected. Instruments and controls 2-17. |
Source: 2010 Nissan Murano Owner's Manual; 2012 Nissan Murano Owner's Manual; 2014 Nissan Murano Owner's Manual. * Usual colour; the manual text doesn't state it.
More for the Murano
Nissan Murano key fob battery size · All Nissan dashboard symbols