Nissan Quest dashboard symbols and warning lights

Every light in the Nissan Quest owner's manual, 2011 to 2017. Tap a light to see what it means and what to do. Red means stop safely, amber means get it checked soon.

2017 Quest warning lights

Anti-lock Braking System (ABS) warning light

Check soon · usual colour

The manual says: When the ignition switch is in the ON position, the Anti-lock Braking System (ABS) warning light illuminates and then turns off. This indicates the ABS is operational. If the ABS warning light illuminates while the engine is running, or while driving, it may indicate the ABS is not functioning properly. If an ABS malfunction occurs, the anti-lock function is turned off.

What to do: Have the system checked. It is recommended you visit a NISSAN dealer for this service.

More about the abs warning light

Blind Spot Warning (BSW) system warning light

Check soon · usual colour

The manual says: If the light comes on and remains on, it may indicate that the BSW system is not functioning properly. Although the vehicle is still driveable, have the system checked.

What to do: It is recommended you visit a NISSAN dealer for this service.

More about the blind spot monitor light

Brake warning light

Stop safely · usual colour

The manual says: This light functions for both the parking brake and the foot brake systems. Parking brake indicator: When the ignition switch is in the ON position, the light comes on when the parking brake is applied. Low brake fluid warning light: When the ignition switch is in the ON position, the light warns of a low brake fluid level.

What to do: Check the brake fluid level. Add brake fluid as necessary. It is recommended you visit a NISSAN dealer for this service. Have the brake system checked. It is recommended you visit a NISSAN dealer for this service.

More about the brake system warning light

Charge warning light

Stop safely · usual colour

The manual says: If the light comes on while the engine is running, it may indicate the charging system is not functioning properly. If the belt is loose, broken, missing or if the light remains on, have your vehicle serviced immediately. CAUTION Do not continue driving if the alternator.

What to do: Turn the engine off and check the alternator belt. It is recommended you visit a NISSAN dealer for this service.

More about the battery / charging system light · Shop jump starters on Amazon

Engine oil pressure warning light

Stop safely · usual colour

The manual says: This light warns of low engine oil pressure. If the light flickers or comes on during normal driving, pull off the road in a safe area, stop the engine immediately and call a NISSAN dealer or other authorized repair shop. The engine oil pressure warning light is not designed to indicate a low oil level. Use the dipstick to check the oil level.

What to do: Pull over safely and turn the engine off. Check the oil level when the engine has cooled. If the level is fine and the light stays on, have it towed.

More about the oil pressure warning light · Shop engine oils on Amazon

Hydraulic pump electric power steering warning light

Check soon · usual colour

The manual says: When the ignition switch is in the ON position, the hydraulic pump electric power steering warning light illuminates. After starting the engine, the hydraulic pump electric power steering warning light turns off. This indicates that the electric power steering is operational.

What to do: It is recommended you have the hydraulic pump electric power steering checked by a NISSAN dealer.

More about the power steering warning light

Master warning light

Check soon · usual colour

The manual says: When the ignition switch is in the ON position, the master warning light illuminates if any of the following are displayed on the vehicle information display:. No key warning. Low fuel warning. Low washer fluid warning. Parking brake release warning. Door/liftgate open warning. Loose fuel cap warning. Extended storage fuse warning.

What to do: Check tire pressure warning.

More about the master warning light (exclamation mark)

Vehicle Dynamic Control (VDC) warning light

Check soon · usual colour

The manual says: When the ignition switch is in the ON position, the Vehicle Dynamic Control (VDC) warning light illuminates and then turn off. The light will blink when the VDC system or the traction control system is operating, thus alerting the driver that the vehicle is nearing its traction limits. The road surface may be slippery.

What to do: Have the system checked. It is recommended you visit a NISSAN dealer for this service.

More about the stability / traction control light

Exterior light indicator

Check soon · usual colour

The manual says: This indicator illuminates when the headlight switch is turned to the AUTO (if so equipped), or position and the front side marker lights, the front parking lights, instrument panel lights, tail lights, rear side marker lights, license plate lights or headlights are on. The indicator turns off when these lights are turned off.

High beam indicator light

Information · usual colour

The manual says: This light comes on when the headlight high beam is on and goes out when the low beam is.

What to do: Dip them for oncoming traffic and when following another car.

More about the high beam indicator

Malfunction Indicator Light (MIL)

Check soon · usual colour

The manual says: If the malfunction indicator light comes on steady or blinks while the engine is running, it may indicate a potential emission control and/or Continuously Variable Transmission (CVT) malfunction. The malfunction indicator light may also come on steady if the fuel-filler cap is loose or missing, or if the vehicle runs out of fuel. 4 liters) of fuel in the fuel tank.

What to do: Check to make sure the fuel-filler cap is installed and closed tightly, and that the vehicle has at least 3 US gallons (11. Check the fuelfiller cap if the LOOSE FUEL CAP warning appears on the vehicle information display. It is recommended you visit a NISSAN dealer for this service. Have the vehicle inspected. It is recommended you visit a NISSAN dealer for this service.

More about the check engine light · Shop OBD2 scanners on Amazon

Overdrive off indicator light

Check soon · usual colour

The manual says: The overdrive off indicator light illuminates when the overdrive off mode is selected. For additional information, see “Continuously Variable Transmission (CVT)” of this.

Security indicator light

Check soon · usual colour

The manual says: The light blinks when the ignition switch is in the ACC, OFF or LOCK position. This function indicates the security system equipped on the vehicle is operational. If the security system is malfunctioning, this light will remain on while the ignition switch is in the ON position. For additional information, see “Security systems”.

What to do: Turn signal/hazard indicator lights The light flashes when the turn signal switch lever or hazard switch is turned on.

More about the key / immobilizer light · Shop key fob batterys on Amazon

Vehicle Dynamic Control (VDC) off indicator light

Check soon · usual colour

The manual says: When the ignition switch is in the ON position, the Vehicle Dynamic Control (VDC) off indicator light illuminates and then turn off. The light comes on when the VDC off switch is pushed to OFF. This indicates that the VDC system and traction control system are not operating.

What to do: Turn it back on unless you are stuck in snow or mud. It normally turns on again with the next start.

More about the stability control off light

Key battery discharge indicator

Check soon · usual colour

The manual says: This indicator appears when the key battery is running out of power. If this indicator appears, replace the battery with a new one. ( 6. Engine start operation for Intelligent.

What to do: Hold the key fob against the start button and start again. If it keeps happening, replace the key fob battery.

More about the key / immobilizer light · Shop key fob batterys on Amazon

Key system indicator

Check soon · usual colour

The manual says: This indicator appears when the Intelligent Key battery is running out of power and when the Intelligent Key System and vehicle are not communicating normally. If this indicator appears, touch the ignition switch with the Intelligent Key while depressing the brake pedal. ( 7. Parking brake release warning This warning appears when the vehicle speed is above 4 MPH (7 km/h) and the parking brake is applied.

What to do: Stop the vehicle and release the parking brake.

More about the key / immobilizer light · Shop key fob batterys on Amazon

Tire replacement indicator

Check soon · usual colour

The manual says: This indicator appears when the customer set distance comes for replacing tires. You can set or reset the distance for replacing tires. ( WARNING The tire replacement indicator is not a substitute for regular tire checks, including tire pressure checks. Many factors including tire inflation, alignment, driving habits and road conditions affect tire wear and when tires should be replaced.

LightColourMeaning
Brake warning lightRed*This light functions for both the parking brake and the foot brake systems. Parking brake indicator: When the ignition switch is in the ON position, the light comes on when the parking brake is applied. Low brake fluid warning light: When the ignition switch is in the ON position, the light warns of a low brake fluid level.
Charge warning lightRed*If the light comes on while the engine is running, it may indicate the charging system is not functioning properly. If the belt is loose, broken, missing or if the light remains on, have your vehicle serviced immediately. CAUTION Do not continue driving if the alternator.
Engine oil pressure warning lightRed*This light warns of low engine oil pressure. If the light flickers or comes on during normal driving, pull off the road in a safe area, stop the engine immediately and call a NISSAN dealer or other authorized repair shop. The engine oil pressure warning light is not designed to indicate a low oil level. Use the dipstick to check the oil level.
Anti-lock Braking System (ABS) warning lightAmber*When the ignition switch is in the ON position, the Anti-lock Braking System (ABS) warning light illuminates and then turns off. This indicates the ABS is operational. If the ABS warning light illuminates while the engine is running, or while driving, it may indicate the ABS is not functioning properly. If an ABS malfunction occurs, the anti-lock function is turned off.
Blind Spot Warning (BSW) system warning lightAmber*If the light comes on and remains on, it may indicate that the BSW system is not functioning properly. Although the vehicle is still driveable, have the system checked.
Hydraulic pump electric power steering warning lightAmber*When the ignition switch is in the ON position, the hydraulic pump electric power steering warning light illuminates. After starting the engine, the hydraulic pump electric power steering warning light turns off. This indicates that the electric power steering is operational.
Master warning lightAmber*When the ignition switch is in the ON position, the master warning light illuminates if any of the following are displayed on the vehicle information display:. No key warning. Low fuel warning. Low washer fluid warning. Parking brake release warning. Door/liftgate open warning. Loose fuel cap warning. Extended storage fuse warning.
Vehicle Dynamic Control (VDC) warning lightAmber*When the ignition switch is in the ON position, the Vehicle Dynamic Control (VDC) warning light illuminates and then turn off. The light will blink when the VDC system or the traction control system is operating, thus alerting the driver that the vehicle is nearing its traction limits. The road surface may be slippery.
Exterior light indicatorAmber*This indicator illuminates when the headlight switch is turned to the AUTO (if so equipped), or position and the front side marker lights, the front parking lights, instrument panel lights, tail lights, rear side marker lights, license plate lights or headlights are on. The indicator turns off when these lights are turned off.
Malfunction Indicator Light (MIL)Amber*If the malfunction indicator light comes on steady or blinks while the engine is running, it may indicate a potential emission control and/or Continuously Variable Transmission (CVT) malfunction. The malfunction indicator light may also come on steady if the fuel-filler cap is loose or missing, or if the vehicle runs out of fuel. 4 liters) of fuel in the fuel tank.
Overdrive off indicator lightAmber*The overdrive off indicator light illuminates when the overdrive off mode is selected. For additional information, see “Continuously Variable Transmission (CVT)” of this.
Security indicator lightAmber*The light blinks when the ignition switch is in the ACC, OFF or LOCK position. This function indicates the security system equipped on the vehicle is operational. If the security system is malfunctioning, this light will remain on while the ignition switch is in the ON position. For additional information, see “Security systems”.
Vehicle Dynamic Control (VDC) off indicator lightAmber*When the ignition switch is in the ON position, the Vehicle Dynamic Control (VDC) off indicator light illuminates and then turn off. The light comes on when the VDC off switch is pushed to OFF. This indicates that the VDC system and traction control system are not operating.
Key battery discharge indicatorAmber*This indicator appears when the key battery is running out of power. If this indicator appears, replace the battery with a new one. ( 6. Engine start operation for Intelligent.
Key system indicatorAmber*This indicator appears when the Intelligent Key battery is running out of power and when the Intelligent Key System and vehicle are not communicating normally. If this indicator appears, touch the ignition switch with the Intelligent Key while depressing the brake pedal. ( 7. Parking brake release warning This warning appears when the vehicle speed is above 4 MPH (7 km/h) and the parking brake is applied.
Tire replacement indicatorAmber*This indicator appears when the customer set distance comes for replacing tires. You can set or reset the distance for replacing tires. ( WARNING The tire replacement indicator is not a substitute for regular tire checks, including tire pressure checks. Many factors including tire inflation, alignment, driving habits and road conditions affect tire wear and when tires should be replaced.
High beam indicator lightBlue*This light comes on when the headlight high beam is on and goes out when the low beam is.

Source: 2017 Nissan Quest Owner's Manual. * Usual colour; the manual text doesn't state it.

2014 Quest warning lights

Anti-lock Braking System (ABS) warning light

Check soon · usual colour

The manual says: When the ignition switch is in the ON position, the Anti-lock Braking System (ABS) warning light illuminates and then turns off. This indicates the ABS is operational. If the ABS warning light illuminates while the engine is running, or while driving, it may indicate the ABS is not functioning properly. If an ABS malfunction occurs, the anti-lock function is turned off.

What to do: Have the system checked by a NISSAN dealer.

More about the abs warning light

Blind Spot Warning (BSW) system warning light

Check soon · usual colour

The manual says: If the light comes on and remains on, it may indicate that the BSW system is not functioning properly. Although the vehicle is still driveable, have the system checked by a NISSAN dealer.

What to do: Clean the rear bumper corners where the sensors sit. If it stays on, have it checked.

More about the blind spot monitor light

Brake warning light

Stop safely · usual colour

The manual says: This light functions for both the parking brake and the foot brake systems. Parking brake indicator: When the ignition switch is in the ON position, the light comes on when the parking brake is applied. Low brake fluid warning light: When the ignition switch is in the ON position, the light warns of a low brake fluid level.

What to do: Check the brake fluid level. Add brake fluid as necessary. Have the brake system checked, and if necessary repaired, by a NISSAN dealer promptly.

More about the brake system warning light

Charge warning light

Stop safely · usual colour

The manual says: If the light comes on while the engine is running, it may indicate the charging system is not functioning properly. If the belt is loose, broken, missing or if the light remains on, see a NISSAN dealer immediately. CAUTION Do not continue driving if the alternator.

What to do: Turn the engine off and check the alternator belt.

More about the battery / charging system light · Shop jump starters on Amazon

Engine oil pressure warning light

Stop safely · usual colour

The manual says: This light warns of low engine oil pressure. If the light flickers or comes on during normal driving, pull off the road in a safe area, stop the engine immediately and call a NISSAN dealer or other authorized repair shop. The engine oil pressure warning light is not designed to indicate a low oil level. Use the dipstick to check the oil level.

What to do: Pull over safely and turn the engine off. Check the oil level when the engine has cooled. If the level is fine and the light stays on, have it towed.

More about the oil pressure warning light · Shop engine oils on Amazon

Hydraulic pump electric power steering warning light

Check soon · usual colour

The manual says: When the ignition switch is in the ON position, the hydraulic pump electric power steering warning light illuminates. After starting the engine, the hydraulic pump electric power steering warning light turns off. This indicates that the electric power steering system is operational.

What to do: Have the hydraulic pump electric power steering system checked by a NISSAN dealer.

More about the power steering warning light

Master warning light

Check soon · usual colour

The manual says: When the ignition switch is in the ON position, the master warning light illuminates if any of the following are displayed on the dot matrix liquid crystal display:. No key warning. Low fuel warning. Low washer fluid warning. Parking brake release warning. Door/lift gate open warning. Loose fuel cap warning. Extended storage fuse warning.

What to do: Check tire pressure warning.

More about the master warning light (exclamation mark)

Vehicle Dynamic Control (VDC) warning light

Check soon · usual colour

The manual says: The light will blink when the Vehicle Dynamic Control (VDC) system or the traction control system is operating, thus alerting the driver that the vehicle is nearing its traction limits. The road surface may be slippery.

What to do: Have the system checked by a NISSAN dealer.

More about the stability / traction control light

Exterior light indicator

Check soon · usual colour

The manual says: This indicator illuminates when the headlight switch is turned to the AUTO (if so equipped), or position and the front side marker lights, the front parking lights, instrument panel lights, tail lights, rear side marker lights, license plate lights or headlights are on. The indicator turns off when these lights are turned off.

High beam indicator light

Information · usual colour

The manual says: This light comes on when the headlight high beam is on and goes out when the low beam is selected.

What to do: Dip them for oncoming traffic and when following another car.

More about the high beam indicator

Malfunction Indicator Light (MIL)

Check soon · usual colour

The manual says: If the malfunction indicator light comes on steady or blinks while the engine is running, it may indicate a potential emission control and/or Continuously Variable Transmission (CVT) malfunction. The malfunction indicator light may also come on steady if the fuel-filler cap is loose or missing, or if the vehicle runs out of fuel. 4 liters) of fuel in the fuel tank.

What to do: Check to make sure the fuel-filler cap is installed and closed tightly, and that the vehicle has at least 3 US gallons (11. Check the fuelfiller cap if the LOOSE FUEL CAP warning appears on the dot matrix liquid crystal display. Have the vehicle inspected by a NISSAN dealer.

More about the check engine light · Shop OBD2 scanners on Amazon

Overdrive off indicator light

Check soon · usual colour

The manual says: The overdrive off indicator light illuminates when the overdrive off mode is selected. For additional information, see “Continuously Variable Transmission (CVT)” of this.

Security indicator light

Check soon · usual colour

The manual says: The light blinks when the ignition switch is in the ACC, OFF or LOCK position. This function indicates the security system equipped on the vehicle is operational. If the security system is malfunctioning, this light will remain on while the ignition switch is in the ON position. For additional information, see “Security systems” Instruments and controls 2-17.

What to do: Hold the key fob against the start button and start again. If it keeps happening, replace the key fob battery.

More about the key / immobilizer light · Shop key fob batterys on Amazon

Vehicle Dynamic Control (VDC) off indicator light

Check soon · usual colour

The manual says: The light comes on when the vehicle dynamic control off switch is pushed to OFF. This indicates that the vehicle dynamic control system and traction control system are not operating.

What to do: Turn it back on unless you are stuck in snow or mud. It normally turns on again with the next start.

More about the stability control off light

Key battery discharge indicator

Check soon · usual colour

The manual says: This indicator appears when the key battery is running out of power. If this indicator appears, replace the battery with a new one. ( 6. Engine start operation for Intelligent.

What to do: Hold the key fob against the start button and start again. If it keeps happening, replace the key fob battery.

More about the key / immobilizer light · Shop key fob batterys on Amazon

Key system indicator

Check soon · usual colour

The manual says: This indicator appears when the Intelligent Key battery is running out of power and when the Intelligent Key System and vehicle are not communicating normally. If this indicator appears, touch the ignition switch with the Intelligent Key while depressing the brake pedal. ( 7. Parking brake release warning This warning appears when the vehicle speed is above 4 MPH (7 km/h) and the parking brake is applied.

What to do: Stop the vehicle and release the parking brake.

More about the key / immobilizer light · Shop key fob batterys on Amazon

Tire replacement indicator

Check soon · usual colour

The manual says: This indicator appears when the customer set distance comes for replacing tires. You can set or reset the distance for replacing tires. ( WARNING The tire replacement indicator is not a substitute for regular tire checks, including tire pressure checks. Many factors including tire inflation, alignment, driving habits and road conditions affect tire wear and when tires should be replaced.

LightColourMeaning
Brake warning lightRed*This light functions for both the parking brake and the foot brake systems. Parking brake indicator: When the ignition switch is in the ON position, the light comes on when the parking brake is applied. Low brake fluid warning light: When the ignition switch is in the ON position, the light warns of a low brake fluid level.
Charge warning lightRed*If the light comes on while the engine is running, it may indicate the charging system is not functioning properly. If the belt is loose, broken, missing or if the light remains on, see a NISSAN dealer immediately. CAUTION Do not continue driving if the alternator.
Engine oil pressure warning lightRed*This light warns of low engine oil pressure. If the light flickers or comes on during normal driving, pull off the road in a safe area, stop the engine immediately and call a NISSAN dealer or other authorized repair shop. The engine oil pressure warning light is not designed to indicate a low oil level. Use the dipstick to check the oil level.
Anti-lock Braking System (ABS) warning lightAmber*When the ignition switch is in the ON position, the Anti-lock Braking System (ABS) warning light illuminates and then turns off. This indicates the ABS is operational. If the ABS warning light illuminates while the engine is running, or while driving, it may indicate the ABS is not functioning properly. If an ABS malfunction occurs, the anti-lock function is turned off.
Blind Spot Warning (BSW) system warning lightAmber*If the light comes on and remains on, it may indicate that the BSW system is not functioning properly. Although the vehicle is still driveable, have the system checked by a NISSAN dealer.
Hydraulic pump electric power steering warning lightAmber*When the ignition switch is in the ON position, the hydraulic pump electric power steering warning light illuminates. After starting the engine, the hydraulic pump electric power steering warning light turns off. This indicates that the electric power steering system is operational.
Master warning lightAmber*When the ignition switch is in the ON position, the master warning light illuminates if any of the following are displayed on the dot matrix liquid crystal display:. No key warning. Low fuel warning. Low washer fluid warning. Parking brake release warning. Door/lift gate open warning. Loose fuel cap warning. Extended storage fuse warning.
Vehicle Dynamic Control (VDC) warning lightAmber*The light will blink when the Vehicle Dynamic Control (VDC) system or the traction control system is operating, thus alerting the driver that the vehicle is nearing its traction limits. The road surface may be slippery.
Exterior light indicatorAmber*This indicator illuminates when the headlight switch is turned to the AUTO (if so equipped), or position and the front side marker lights, the front parking lights, instrument panel lights, tail lights, rear side marker lights, license plate lights or headlights are on. The indicator turns off when these lights are turned off.
Malfunction Indicator Light (MIL)Amber*If the malfunction indicator light comes on steady or blinks while the engine is running, it may indicate a potential emission control and/or Continuously Variable Transmission (CVT) malfunction. The malfunction indicator light may also come on steady if the fuel-filler cap is loose or missing, or if the vehicle runs out of fuel. 4 liters) of fuel in the fuel tank.
Overdrive off indicator lightAmber*The overdrive off indicator light illuminates when the overdrive off mode is selected. For additional information, see “Continuously Variable Transmission (CVT)” of this.
Security indicator lightAmber*The light blinks when the ignition switch is in the ACC, OFF or LOCK position. This function indicates the security system equipped on the vehicle is operational. If the security system is malfunctioning, this light will remain on while the ignition switch is in the ON position. For additional information, see “Security systems” Instruments and controls 2-17.
Vehicle Dynamic Control (VDC) off indicator lightAmber*The light comes on when the vehicle dynamic control off switch is pushed to OFF. This indicates that the vehicle dynamic control system and traction control system are not operating.
Key battery discharge indicatorAmber*This indicator appears when the key battery is running out of power. If this indicator appears, replace the battery with a new one. ( 6. Engine start operation for Intelligent.
Key system indicatorAmber*This indicator appears when the Intelligent Key battery is running out of power and when the Intelligent Key System and vehicle are not communicating normally. If this indicator appears, touch the ignition switch with the Intelligent Key while depressing the brake pedal. ( 7. Parking brake release warning This warning appears when the vehicle speed is above 4 MPH (7 km/h) and the parking brake is applied.
Tire replacement indicatorAmber*This indicator appears when the customer set distance comes for replacing tires. You can set or reset the distance for replacing tires. ( WARNING The tire replacement indicator is not a substitute for regular tire checks, including tire pressure checks. Many factors including tire inflation, alignment, driving habits and road conditions affect tire wear and when tires should be replaced.
High beam indicator lightBlue*This light comes on when the headlight high beam is on and goes out when the low beam is selected.

Source: 2014 Nissan Quest Owner's Manual. * Usual colour; the manual text doesn't state it.

2011 Quest warning lights

Anti-lock Braking System (ABS) warning light

Check soon · usual colour

The manual says: When the ignition switch is in the ON position, the Anti-lock Braking System (ABS) warning light illuminates and then turns off. This indicates WARNING/INDICATOR LIGHTS AND.

What to do: Drive carefully, leave extra stopping distance and have it checked soon. If the red brake light is also on, stop driving.

More about the abs warning light

Brake warning light

Stop safely · usual colour

The manual says: This light functions for both the parking brake and the foot brake systems. Parking brake indicator: When the ignition switch is in the ON position, the light comes on when the parking brake is applied. Low brake fluid warning light: When the ignition switch is in the ON position, the light warns of a low brake fluid level.

What to do: Check the brake fluid level. Add brake fluid as necessary. Have the brake system checked, and if necessary repaired, by a NISSAN dealer promptly.

More about the brake system warning light

Charge warning light

Stop safely · usual colour

The manual says: If the light comes on while the engine is running, it may indicate the charging system is not functioning properly. If the belt is loose, broken, missing or if the light remains on, see a NISSAN dealer immediately. Instruments and controls 2-11.

What to do: Turn the engine off and check the alternator belt.

More about the battery / charging system light · Shop jump starters on Amazon

Engine oil pressure warning light

Stop safely · usual colour

The manual says: This light warns of low engine oil pressure. If the light flickers or comes on during normal driving, pull off the road in a safe area, stop the engine immediately and call a NISSAN dealer or other authorized repair shop. The engine oil pressure warning light is not designed to indicate a low oil level. Use the dipstick to check the oil level.

What to do: Pull over safely and turn the engine off. Check the oil level when the engine has cooled. If the level is fine and the light stays on, have it towed.

More about the oil pressure warning light · Shop engine oils on Amazon

Hydraulic pump electric power steering warning light

Check soon · usual colour

The manual says: When the ignition switch is in the ON position, the hydraulic pump electric power steering warning light illuminates. After starting the engine, the hydraulic pump electric power steering warning light turns off. This indicates that the electric power steering system is operational.

What to do: Have the hydraulic pump electric power steering system checked by a NISSAN dealer.

More about the power steering warning light

Master warning light

Check soon · usual colour

The manual says: When the ignition switch is in the ON position, the master warning light illuminates if any of the following are displayed on the dot matrix liquid crystal display:. No key warning. Low fuel warning. Low washer fluid warning. Parking brake release warning. Door/lift gate open warning. Loose fuel cap warning. Check tire pressure warning See “DOT MATRIX LIQUID CRYSTAL DIS.

What to do: Read the message on the multi-information display. Red means stop safely; amber means get it checked.

More about the master warning light (exclamation mark)

Vehicle Dynamic Control (VDC) warning light

Check soon · usual colour

The manual says: The light will blink when the VDC system or the traction control system is operating, thus alerting the driver that the vehicle is nearing its traction limits. The road surface may be slippery. When the vehicle dynamic control warning light illuminates when the vehicle dynamic control system is turned on, this light alerts the driver to 2-14 Instruments and controls.

What to do: If it flashes, ease off and drive gently for the conditions. If it stays on, have the system checked.

More about the stability / traction control light

Front passenger air bag status light

Check soon · usual colour

The manual says: The front passenger air bag status light ( ) will be lit and the passenger front air bag will be OFF depending on how the front passenger seat is being used. For front passenger air bag status light operation, see “NISSAN ADVANCED AIR BAG SYSTEM (front seats)” in the “1. Safety — Seats, seat belts and supplemental restraint.

What to do: The car drives normally, but get it checked soon. Do not try to repair airbag parts yourself.

More about the airbag (srs) warning light

High beam indicator light

Information · usual colour

The manual says: This light comes on when the headlight high beam is on and goes out when the low beam is.

What to do: Dip them for oncoming traffic and when following another car.

More about the high beam indicator

Low beam indicator light

Information · usual colour

The manual says: The light comes on when the front park, side marker, tail and license plate lights are on.

What to do: Nothing to do.

More about the headlight / low beam indicator

Malfunction Indicator Light (MIL)

Check soon · usual colour

The manual says: If the malfunction indicator light comes on steady or blinks while the engine is running, it may indicate a potential emission control. The malfunction indicator light may also come on steady if the fuel-filler cap is loose or missing, or if the vehicle runs out of fuel. 4 liters) of fuel in the fuel tank.

What to do: Check to make sure the fuel-filler cap is installed and closed tightly, and that the vehicle has at least 3 US gallons (11.

More about the check engine light · Shop OBD2 scanners on Amazon

Overdrive off indicator light

Check soon · usual colour

The manual says: The overdrive off indicator light illuminates when the overdrive off mode is selected. For additional information, see ““CONTINUOUSLY VARIABLE TRANSMISSION (CVT)” in the “5. Starting and driving” section of this.

Security indicator light

Check soon · usual colour

The manual says: The light blinks when the ignition switch is in the ACC, OFF or LOCK position. This function indicates the security system equipped on the vehicle is operational. If the security system is malfunctioning, this light will remain on while the ignition switch is in the ON position. For additional information, see “SECURITY SYSTEMS” later in this section.

What to do: Turn signal/hazard indicator lights The light flashes when the turn signal switch lever or hazard switch is turned on.

More about the key / immobilizer light · Shop key fob batterys on Amazon

Vehicle Dynamic Control (VDC) off indicator light

Check soon · usual colour

The manual says: The light comes on when the vehicle dynamic control off switch is pushed to OFF. This indicates that the vehicle dynamic control system and traction control system are not operating.

What to do: Turn it back on unless you are stuck in snow or mud. It normally turns on again with the next start.

More about the stability control off light

Key battery discharge indicator

Check soon · usual colour

The manual says: This indicator appears when the key battery is running out of power. If this indicator appears, replace the battery with a new one. ( Maintenance and do-it-yourself” section.) 6. Engine start operation for Intelligent.

What to do: Hold the key fob against the start button and start again. If it keeps happening, replace the key fob battery.

More about the key / immobilizer light · Shop key fob batterys on Amazon

Key system indicator

Check soon · usual colour

The manual says: This indicator appears when the Intelligent Key battery is running out of power and when the Intelligent Key System and vehicle are not communicating normally. If this indicator appears, touch the ignition switch with the Intelligent Key while depressing the brake pedal. ( Starting and driving” section.) 7.

What to do: Stop the vehicle and release the parking brake. Refuel as soon as it is convenient, preferably before the fuel gauge reaches the empty (0) position. Add washer fluid as necessary.

More about the key / immobilizer light · Shop key fob batterys on Amazon

Tire replacement indicator

Check soon · usual colour

The manual says: This indicator appears when the set time comes for replacing tires. You can set or reset the distance for replacing tires. (See “TRIP COM.

LightColourMeaning
Brake warning lightRed*This light functions for both the parking brake and the foot brake systems. Parking brake indicator: When the ignition switch is in the ON position, the light comes on when the parking brake is applied. Low brake fluid warning light: When the ignition switch is in the ON position, the light warns of a low brake fluid level.
Charge warning lightRed*If the light comes on while the engine is running, it may indicate the charging system is not functioning properly. If the belt is loose, broken, missing or if the light remains on, see a NISSAN dealer immediately. Instruments and controls 2-11.
Engine oil pressure warning lightRed*This light warns of low engine oil pressure. If the light flickers or comes on during normal driving, pull off the road in a safe area, stop the engine immediately and call a NISSAN dealer or other authorized repair shop. The engine oil pressure warning light is not designed to indicate a low oil level. Use the dipstick to check the oil level.
Anti-lock Braking System (ABS) warning lightAmber*When the ignition switch is in the ON position, the Anti-lock Braking System (ABS) warning light illuminates and then turns off. This indicates WARNING/INDICATOR LIGHTS AND.
Hydraulic pump electric power steering warning lightAmber*When the ignition switch is in the ON position, the hydraulic pump electric power steering warning light illuminates. After starting the engine, the hydraulic pump electric power steering warning light turns off. This indicates that the electric power steering system is operational.
Master warning lightAmber*When the ignition switch is in the ON position, the master warning light illuminates if any of the following are displayed on the dot matrix liquid crystal display:. No key warning. Low fuel warning. Low washer fluid warning. Parking brake release warning. Door/lift gate open warning. Loose fuel cap warning. Check tire pressure warning See “DOT MATRIX LIQUID CRYSTAL DIS.
Vehicle Dynamic Control (VDC) warning lightAmber*The light will blink when the VDC system or the traction control system is operating, thus alerting the driver that the vehicle is nearing its traction limits. The road surface may be slippery. When the vehicle dynamic control warning light illuminates when the vehicle dynamic control system is turned on, this light alerts the driver to 2-14 Instruments and controls.
Front passenger air bag status lightAmber*The front passenger air bag status light ( ) will be lit and the passenger front air bag will be OFF depending on how the front passenger seat is being used. For front passenger air bag status light operation, see “NISSAN ADVANCED AIR BAG SYSTEM (front seats)” in the “1. Safety — Seats, seat belts and supplemental restraint.
Malfunction Indicator Light (MIL)Amber*If the malfunction indicator light comes on steady or blinks while the engine is running, it may indicate a potential emission control. The malfunction indicator light may also come on steady if the fuel-filler cap is loose or missing, or if the vehicle runs out of fuel. 4 liters) of fuel in the fuel tank.
Overdrive off indicator lightAmber*The overdrive off indicator light illuminates when the overdrive off mode is selected. For additional information, see ““CONTINUOUSLY VARIABLE TRANSMISSION (CVT)” in the “5. Starting and driving” section of this.
Security indicator lightAmber*The light blinks when the ignition switch is in the ACC, OFF or LOCK position. This function indicates the security system equipped on the vehicle is operational. If the security system is malfunctioning, this light will remain on while the ignition switch is in the ON position. For additional information, see “SECURITY SYSTEMS” later in this section.
Vehicle Dynamic Control (VDC) off indicator lightAmber*The light comes on when the vehicle dynamic control off switch is pushed to OFF. This indicates that the vehicle dynamic control system and traction control system are not operating.
Key battery discharge indicatorAmber*This indicator appears when the key battery is running out of power. If this indicator appears, replace the battery with a new one. ( Maintenance and do-it-yourself” section.) 6. Engine start operation for Intelligent.
Key system indicatorAmber*This indicator appears when the Intelligent Key battery is running out of power and when the Intelligent Key System and vehicle are not communicating normally. If this indicator appears, touch the ignition switch with the Intelligent Key while depressing the brake pedal. ( Starting and driving” section.) 7.
Tire replacement indicatorAmber*This indicator appears when the set time comes for replacing tires. You can set or reset the distance for replacing tires. (See “TRIP COM.
Low beam indicator lightGreen*The light comes on when the front park, side marker, tail and license plate lights are on.
High beam indicator lightBlue*This light comes on when the headlight high beam is on and goes out when the low beam is.

Source: 2011 Nissan Quest Owner's Manual. * Usual colour; the manual text doesn't state it.

More for the Quest

Nissan Quest key fob battery size · All Nissan dashboard symbols